Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's Impossible! Vegan 'Meat' Not So Good for You After All
APRIL 16, 2024
There's a "health halo" surrounding manufactured vegan "meat" products even though they provide no "clear benefit" — and might even be bad for your heart health, according to a new study reported on in the Daily...
I read that all the Plymouth wingcars had to be built before January 1st 1970,because of the 5 mph federal bumper standard being enacted on that date. By 1973 all cars had those guard rail looking bumpers on them except for Chrysler cars that managed to get away with spacing the bumpers away...
They will make parts as long as they sell. What does not sell will be discontinued. AMD has already discontinued a lot of stuff that didn't sell well,other manufacturers will do the same. Look at the price of the pie tins for the air cleaners. They used to be $29.00. Try to buy one now.
I personally like safe investments versus risky investments even though that they may not pay as much. This morning, Submit and I went to our Credit union to withdraw our (just matured) CD deposit funds, take out the interest it earned as spending money, and redeposit the full principal in...
The concern I had with the wheelwell route of the lines was tire clearance.
Personally, I love a wide wheel and tire because I'm into cornering and braking rather than drag racing or casual cruising. The lines in the wheelwell would be fine with stock width tires and wheels and a little larger...
I am not mortgage-free. That being said, I bought my home...late to the party...in 20015 for 243,000 at 3.75% interest on a VA loan. I refinanced in 2020 to get a lower % rate and got 2.5% with a very small cash out bringing the amount up to 260,000. The estimated value is now at 425,000 which...
One pair of polished 16" Anco wiper arms and blade holders. They have not been used since being polished. $70 + postage. Money orders only (postal preferred). No Paypal.
I would say, "GO FOR IT !!!" On the plus side, restoration of one of these should be a whole lot cheaper than a B-Body. Little money, big fun.:thumbsup:
This is why I've never considered buying at auction. I've never been interested in a OEM concours restored piece. As Ron says, a good recording of the restoration process can verify an awful lot as to quality and scope of what was performed. It gets a lot dicier with the next level down. I've...
So I studied Figure 15 intensely and read and re-read the instructions. According to the instructions you take these small Adel clamps and clamp the smaller refrigerant line to the fender apron. Then zip tie all the other lines to that small refrigerant line.
I just can't see how this would...
There is a group that comes through our Northern Camps village every year (which is a good 7.5 hours driving a car from the border), that go all the way to up to Cochrane or possibly right up to Moose Factory on James Bay then back home. They are for the most part from the USA...
1970 440 HP
I've not done this before on this board but skimmed through a couple of responses regarding lost & found in 1 of the other forums on this board which also mentioned how to use the search function.
I have a coupl'a other blocks/engines that need to go away preferably to the car...
I think if you have the room available, it might be good to keep things like the grill you saw, or any of the trim pieces on the outside of the car along with tail lights and such. I know some stuff is repopped for our cars, but how long will they continue to make it is the question. I say if...