Search results for query: *

As shown in your photo, some can look different, but should still work, if the cup height is the same. I don't know anything about wedge ball sizes at the end of the pushrods. All my old pushrods laying around here for a 426 Hemi are 3/8" ball on the bottom. Yet nowadays people use 5/16" balls...

All right boys. Time for drinks 10 hrs drive door to door. Can I say LA traffic sucks

Pair of good hood hinges from a 1969 RR. $30 plus shipping from Lincoln, Ne 68516 to lower 48. Pay with money order only.

That's been said before! I even have the PERV van. Perv stands for Pete's Excellent Recreational Vehicle! My wife won't get within 50 feet of it.

You need to change your screen name - Chargerpervert

That's eatin good in the neighborhood, Mr. Dubb!

It doesn't cost me anything...if I stay in the house during the winter. I have an electric Modine out in the shop and it pulls about 28 amps just like an electric clothes dryer. So how many loads of clothes do I want to do while working out in the garage?

Two 15x7 Cop wheels in very good condition. Chrysler part number 3766077. 4.5 bolt pattern with 4.5 backspace. $100 plus shipping from Lincoln, Ne 68516 to lower 48. Pay with money order only.

This thread is about pancakes, not saggy boobs. Or is it?

Welcome from AZ... :usflag:

Normal for the height to change after driving the car. It will go lower if anything, and maybe not the same on each side. So get it close and drive it. Jouncing is fine but usually not enough to end the changes in height.

Sent you a private message.

...bills have gone up some 30%+ they claim to me it's doubled on my end, 75%-100% more... $300 a month "now" for the house, 1600sqft if it's under 40* outside I would imagine to keep the garage even just above freezing all winter, it'd be in the multiple hundreds a month for just the garage My...

There is a story behind that. I bought two NOS 70 Charger rear quarter panels at Carlisle, and I didn't want them to get stolen from the truck so I brought them into the hotel room and put them next to the bed. That started the rumor that I slept with my sheetmetal! There may have been some...

Jouncing - should be done between adjustments - it allows the car suspension to settle into the new position. It doesn't hurt to roll the car back and forth between jounces. :thumbsup:

3. I'm told NOT to use the battery as a power source because of the way my car's charging system works. I did some research and believe what I was told. ---Yeah… you really want to connect directly to the battery. Frankly, your charging system is connected to it, but via other systems, etc...

And painted .

So your rebuild work didn't improve the steering box?

Look closer, that’s an oil filter.

Diplomat police cars came with 215/70-15 eagle GT tires on the 15x7 police wheels. Factory issue. I like a 225/60-15 size better. And they will fit a 66-67 b body also.