Search results for query: *

?? You mean email alerts on it? Do you have the watch button checked and 'receive email notifications' checked too?

Test all your fuses. Do not look at them and say they look ok.

You can get the emblem lots of places, but you have to search 1969 as that's when they started on the trunk lip AFAIK. It's the same piece as the grill emblem.

1969 coronet 500 convertible, standard dash. No dash lights. Pulled the switch panel plate out (that's another story) and have the dimmer switch out. Is there a bench test to determine if the dimmer switch is operative ? I've got full voltage at the top terminal connecter (14.5 v, that is...

I've had 1000's of pulls with one and never a failure. At least a couple of hundred had an aluminum intake.

Funny thing I not getting ALERTS for my thread.

Killer stuff right there, waiting on a “road test” video. Cliff Ramsdell

I believe Resto Rick sells a paint that mimics the original dip primer

i thought i saw them in the classic industries cat ! i will look when i get home ….

Did '68's get a Bee emblem on the trunk lid?

Nacho, Wiring diagrams do indeed show power windows & liftgate window options power take on the battery side of the ammeter, conceding that one point. Not sure I follow the logic in that. Possibly not being an operating load, it’s likely the momentary high current draw from window lift motors...

Good Lord, been ages since I played this...

#34 Michael McDowell was the quickest around 'Dega during qualifying. No Pole Pick bonus point awarded this week.

Exactly, disassembly MONTHS or longer before. And all those labeled baggies of screws, bolts, fasteners, etc. I tried so carefully to keep organized when it came time for re-assembly...then found out it was a good effort, but not - great..

Years ago I had a similar experience where I shut the engine off and heard something rattle… sounded like a tink clink tink tink under the hood, hard to describe. Anyhow, upon startup there was a definite rattle and the investigation began. One of the screws from the underside of this Predator...

I tested the following - all use an inductive pickup - the ignition uses an MSD 6A module; Sears 45118 - circa early 80's Innova 3551 - circa 2009 Innova 5568A - circa 2015 - dialback timing light All three provided the same result for timing set at zero degrees BTDC. I installed timing tape...

made it watermelon

I need a 1968 Super Bee (Bumble Bee) emblem for the right rear trunk area. Anyone have one or know where i can get it? Can't seem to find one, only stickers. TYIA