Search results for query: *

Inner pinion bearing. Could be gears too .

Delta V posted a link to Stinger fiberglass for these: I'd buy these right away if they were available!

Priced as a set? Can this be true? $1030 for TWO fenders? Holy crap...I'd step up and give these a try for that price! I do see "NOT AVAILABLE" at the bottom though.

haha, yes traffic...these cars can only get driven on the weekends with this traffic. everything is a pain to move around so I'm mostly on 2 wheels. I'm a daily motorbike rider myself. As requested (these are a bit old. havent taken recent shots but these are what they look like from about a...

If I pull the rear I'm changing the whole lot , gears , bearings etc anything else it might hurt driving her ?

I've cut up a few cars and trucks here at my place. The Motorhomes were not fun but not the worst. There is a fair amount of stuff to cut away that has NO recycle value...Plywood, fiberglass, plastic and plywood. I got the 360s from these. One had the standard 727, the other had that BS...

wow, nice to know that there are a few here that are familiar with the place! yes these 2 cars were in fact probably rolling with these that youve mentioned! :)

I modified these: Moog, purchased through Rock Auto. Ball jointed so no bushings to wear out. Add grease to the ZERKs though. They were a bit too long so I cut about 1 1/2" out of the middle. Welded back together, sand blasted and ready to go.

Can you imagine that's been more than 30 years ago! how time flies. yup! Angeles City.

1. I'm new to building cars this old. I've spent my life working on anything from the 90s and later. 2. I'm still learning the vocabulary, so when I hear ammeter, I don't know where or what it is LOL (I assume it's the actual gauge in the cluster). So, I have a Sniper 2 installed on my '69...

I used Montway Auto transport to ship a car from Iowa to Honolulu. There is a few extra steps to ship a car to Hawaii. Several transport companies I called only wanted to handle the tranport to from Iowa to california, and wanted me to handle the shipping from california to Hawaii. But Montway...

Hmmm..... Cool!

As stated it will get worse, and will be worse on your pocketbook the longer you wait.

A front grille for a '40 Plymouth pickup- fabricated from an old set of.patio furniture. Miter box steering from a RTS bus (gets the steering shaft past the headers)

Nice, but looks like no power steering and I can't get any pictures of the fan drive pulley. Appreciate the help!

More.

So today I finished up shrinking the corner piece. From there, put it on the bench, clamped it down, got it tacked together. Once that was done, I checked the fit between the lid and base. I calculated correctly. I need to shear up a piece about 1 7/8" for the vertical part. But before I weld...

Take a look. The triangle bracket for the alternator attaches to a different point on the water pump housing. The alternator pulley lines up with the water pump pulley. Now look at the A/C placement of the alternator bracket. The green arrow shows the NON A/C mounting boss further away from...

Does this article help? Gallery: Vintage Air Sets Up This 1967 Satellite For Summer Sundays - Mopar Connection Magazine | A comprehensive daily resource for Mopar enthusiast news, features and the latest Mopar tech

Snow White remake