• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Kern Dog

    Installing Classic Auto Air in a '70 Charger

    I've seen a few videos that also state to leave the red line and knob alone. I planned to put the vacuum pump on and see if it holds the recommended 30 in/hg or whatever the spec is. Thanks, I've heard that too. I am curious though....if the vacuum pump is pulling, where does the air inside...
  2. B

    Holley Carb 2300 2BBL Fuel Bowl slowly draining internally!?

    Did you have a backfire? Possibly blowing the power valve? Doesn't take much.
  3. RemCharger

    Dana 60 Outer Bearing Races "Cracked"

    Define operating loads.
  4. Chargerjase

    Installing Classic Auto Air in a '70 Charger

    FYI, the reason you put the system in a vacuum is to remove moisture. The vacuum lowers the boiling point of water and the water actually boils off when doing this process.
  5. 1 Wild R/T

    Installing Classic Auto Air in a '70 Charger

    If you open the handle on the right (the red handle) you allow flow from the high pressure side to enter the tank... Generally the tank is big enough to absorb that but it still shouldn't be done... If you were to do that with one of the small 12oz cans it could explode... The only reason to...
  6. kiwigtx

    The Meme not a Meme Thread Part DEUX

    Turkey slices, bacon, Swiss cheese and a small amount of tomato. I asked for white bread toasted.....I hate that bird seed bread. Fries were good and the Heinz 57 was great to go with it.
  7. G

    Pinging 505 help

    The heat range of the plug is controlled at the design stage. A projected nose tip plug will have the insulator size adjusted to maintain the nominated heat range. Projected nose tip plugs are better at self cleaning & preventing misfires. You would only switch to a non-projected tip plug if you...
  8. threewood

    Where can you order custom hood scoop script? 340 scoops

    Blue Bee Printing. I had custom 440 4 BBL hood stickers printed by them and they do excellent work. You need to provide a picture and size of the stickers and they can replicate the script for the new engine size.
  9. RemCharger

    The Meme not a Meme Thread Part DEUX

    Was it good? What's in it
  10. kiwigtx

    The Meme not a Meme Thread Part DEUX

    Close.... a Superbird sandwich at the local Dennys. With a coke, no ice. :lol:
  11. G

    Transgo TF2 in A904

    The spring controls the application/release rate of the servo, so it is also a shift timing device. The new spring is supplied to alter that timing.
  12. Kern Dog

    Installing Classic Auto Air in a '70 Charger

    I thought that you connect the 3 hoses and that the system just follows whatever path that it is supposed to. All 3 hose ends are unique and cannot be attached to a wrong port. I admit, I'm not familiar with this stuff.
  13. RemCharger

    The Meme not a Meme Thread Part DEUX

    A grilled sandwich, possibly cheese but sliced very nicely with crinkle cut fries on a nice kitchen table. ( you were mentioning some members having dementia... ?)
  14. RemCharger

    Missing 66 Charger rear window stainless trim

    Hold out for the real thing. Top and bottom are drastically different. You would need a trim stretcher as well.
  15. G

    Stalling at temp while stopped

    All of the above are good suggestions & should be checked. Need more info. Did problem just start? Was something changed? Etc.
  16. 1 Wild R/T

    Installing Classic Auto Air in a '70 Charger

    No!! But you read the pressure as an indicator of state of charge...
  17. G

    67 440 mechanical fuel pump low fuel output...

    Depending on the orientation of the filter, you can get an airlock inside it....but the pump is working ok.
  18. RemCharger

    64 Only

    He ran about a 12.40 12.30. This was my friend in saskatchewan. Sask Int'l Raceway
  19. G

    Need help identifying camshaft etching

    Just a guess. F= flat tappet [ solid lifter ] 7 = 107 LSA 298/298 adv duration.
Back
Top