Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a spare one. One of the side straps came loose and I took it to a radiator shop. They fixed the side strap, flushed and checked everything. I was told that the core was weak, but it had no leaks. For whatever that's worth. My plan was to have it recored if I have to use it. The one in my...
Anyone know of the dimension of a 66/67 b body hardtop windshield (coronet)? I bought one from the local glass installer but when i compare it to the one that was in the car, the new one is approximately 3/8 wider. The height and overall shape look to match good but i'm wonderning if i'm going...
From my experience, use a Wix filter, not Fram. From an earlier post, if a pushrod bends and a lifter pops out of its bore (highly unlikely), you would have NO oil pressure, not just low.
1st things 1st, drain oil, send sample in for analysis. Replace filter with quality filter and oil with 20w50. At this point you will at least know that it has good filter and oil. After that, it could be many things. Easiest w engine still in is oil pump in my opinion.
Yes, live in Michigan and have front, rear and AWD stuff. Plus a Jeep TJ...AWD is just nicer in some kinds of crap.
To be truthful I don't even need another car but if I get one of these it'll be AWD.
You will need to bend the arm and should be able to get "full" & "empty" fairly close. The middle of your gauge sweep will still not be accurate however. OEM senders were non linear and all the new reproductions are linear. While you are bending things around, you will probably also have to bend...
I have the Hellwig front bar. I looked at the Hellwig rear bar and I believe it used a through bolt and a bracket on the inside of the frame rail that I thought would interfere with the mufflers. The ones that use a bracket which attaches to the bottom of the frame rail would not have the same...
I don’t know if he’s on here or on A bodies only but he’s on MoParts goes by the name of Rhino Dart it’s one of the biggest body collectors I’ve ever met. Also part of Chicago and Mopar connection. Hear the man for sure. Send me a personal message. I might have his phone number for you.