Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
"Delrin" ?
Don't think you're gonna like
this. Not much give in hard
nylon type materials.
My 4-link has rubber
bushings instead of heim
joints for shock absorption
properties, as are the
bushings in both my upper
and lower a-arms.
You may find these
bushings are going
to cause some problems...
Apex seals were improved to the point of being fairly reliable. Between the first NSU in 1964 and the last Mazda RX-8 in 2012, improvements were constant and beneficial. It's true that emissions were a problem to overcome, and were a difficult hurdle. The current Mazda MX-30 is the only car...
Priced as a set? Can this be true? $1030 for TWO fenders?
Holy crap...I'd step up and give these a try for that price!
I do see "NOT AVAILABLE" at the bottom though.
haha, yes traffic...these cars can only get driven on the weekends with this traffic. everything is a pain to move around so I'm mostly on 2 wheels. I'm a daily motorbike rider myself. As requested (these are a bit old. havent taken recent shots but these are what they look like from about a...
I've cut up a few cars and trucks here at my place. The Motorhomes were not fun but not the worst.
There is a fair amount of stuff to cut away that has NO recycle value...Plywood, fiberglass, plastic and plywood.
I got the 360s from these. One had the standard 727, the other had that BS...
wow, nice to know that there are a few here that are familiar with the place! yes these 2 cars were in fact probably rolling with these that youve mentioned! :)
I modified these:
Moog, purchased through Rock Auto. Ball jointed so no bushings to wear out. Add grease to the ZERKs though.
They were a bit too long so I cut about 1 1/2" out of the middle.
Welded back together, sand blasted and ready to go.