Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think you're alright with the stock pump, but I prefer high volume/standard pressure (50-60 psi?) pumps with a 6 qt pan. I think years ago high volume only came with high pressure springs, but now they have both.
I have lost oil pressure momentarily with a stock pan and HV/HP pump. I was at...
^^^^You had me right there^^^^
Another '69 RR owner here too. How cool is it that yours originally belonged to your dad :thumbsup:
Greetings and welcome to FBBO from NY. Very nice car.
So actually in 1966 the tags were printed as 426 Hemi Eng and in 1967 they said Hemi Engine . They could have been put anywhere in the car I’ve even heard of them being in headliners also
Mine were in the trunk , under the trunk liner . Some came with fine wires attached and some didn’t . I put...
These are Plymouth, not Dodge, vinyl top trim. 20 7/8 inches long. I took these off a 69 Road Runner. No sanding marks or dents. You get some rusty ,not usable clips, so you know exactly what to look for. $125 shipped.
I reached out to Ogden Chrome a few months ago to re-chrome my front bumper...$1400.00 and 6-8 month turn around. They do an awesome job but man they're not cheap
It's even worse. The cam failed. It is out and the oil pan is off. A new lifter pair is on it's way from Isky. If the mystery cam I was given checks out today it can start going back together. At least the trans is repaired and back in.
Doug
These are Superformance gaskets. As far as I know it’s the only one they make, and it’s the only thin gasket I could find in the spring of 2021.
I sprayed these both sides with Copper Coat and you can still see it on the block heads and gasket.
There is rust pitting around some of the gasket...