Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I did the same thing on my car to cure the drone. The dead ends and the length of those tubes is key to cancel the acoustic wave response. I'll dig up my photos around somewhere. I recall on my install it called for each dead end tube to be 28-inches long. Yours look a lot shorter. What is...
I’ll look for the switch but I doubt it,
Here my PayPal address
[email protected]
So go to your PayPal & hit send money
Then put in my address & hit continue ,put in the amount $185 , then hit send, ($10 for fees )
Thank you
Been there and done that more than once.
On our recent trip to Florida, I had Submit find hotels, restaurants, rest areas and points of interest on her cell phone on top of checking out the road atlas for different routes. She packed enough food so that we could eat breakfast and lunch out on...
I used Addco on my Charger. I used a factory style bar on my 442. These old cars practically beg for one. I used to get a ton of rear body roll, I see why they are called land yachts.
I went from Comp hydraulic roller cam n lifter to Hughes hydraulic roller cam n lifters. All are different. Pushrods for Hughes combo are "about" 3/8" shorter than the Pushrods for the Comp combo. Lifter plunger/body on Hughes is longer.
When I did all my ptv, roller to valve tip geometry and...
What yr 727 and valve body in it? Early pre '70 (don't quote me on dates) didn't have "PTK" (part throttle kickdown) only full throttle. Those w/out PTK also don't go down to 2nd from drive while going slow until a full stop or manually placed in 2nd. I have same issue and am ordering "PTK"...