Search results for query: *

Having problems with my heater I believe it's in the wires but I am not sure .on the medium speed when I checked it it has 12 V coming from it .The low and high does not have anything that shows on the meter,Could it be the controlsUp on the Dash At the start of the wiring or is it the plug...

I would like this light in high beam found the product manual no sign of contact phone number for info on where to get this light does anyone know where I can get them thank you in advance

I need one I don't care if it's used I don't know where to find one new. Any ideas, " CABLE ONLY" for 69 bee

I need one for 1969 superbee, Does anyone know where I can get one ,thanks for all the help

Have a stock intake manifold a stock throttle bracket and a quick fuel carburetor it doesn't seem like the throttle cable works can someone please post pics of a stock setup or something that's aftermarket I would like a general idea of what I need to do to fix this. Forgot to mention this is...

Received my new radiator from bob at glen ray radiators and I must say its everything I expected. After reading some posts on this site and speaking with bob, I couldn't wait to receive my radiator. After I installed it I couldn't wait to take it out and see how it worked. Kept the engine...

Purchased a fan clutch from my local auto store. They crossed the numbers to a haydon 2765. The hole where the water pump shaft goes was about 3/4 of an inch. My input shaft is 1/2 inch possibly 9/16ths. There was no bushing sent with that so I returned that bc I could not center the fan...

I was told by a vendor at carlisle this some place called north western parts but I can't seem to find it. I don't want P G CLASSIC JUNK.

what are the correct # for 1969 superbee 4 spd. radiator, how many different styles were there. Does anyone have pic. I've seen pic. online none good enough to see # Thanks

Can someone show pic of 440-383 baseplates.I have stock383 and now need a 440, I have post this before and some said this combo works. Not for me I have 440 with rpm heads rpm perf. intake, quick fuel carb.I orderd new base from pgclassic 2nd one now still can't close my hood. I would like to...

Is there a difference in bellhouse for 383 or 440. and size of clutch 10.5 -11 I have 11 now I was told make sure I get the right bell, fly wheel is 143 teeth 14.5" across, and will have a issue with starter. last time I delt with stock bell was 1978 I've been running a blowproof since then...

Took out the 383 put in 440, Edelbrock rpm performer heads,440 rpm intake,will a 440 base plate and filter fit under the hood the new intake is 2&1/4" higher than stock engine just want to make sure it fits

where can I get good heavy duty springs for 69 bee tried amd first springs we're bad no problems on return new springs lasted 1&1/2 summers now hood is starting to drop amd sent new springs free of charge again no problems. The whole back of car is amd products everything fit great , after...

Does anyone have a good set of wiper arms for 69 bee # on wiper arm is 15B

Now that I broke the tabs off my sending unit where can I get one I won't have to calibrate??????????????

I have a69 bee how does switch and light hook up in glove box. I have a pink wire I believe is for switch not sure how light goes as always thanks for help.

who has the best wheel moldings for 69 bee looking for quality parts

6 fuses in fuse box but only 5 work. The only one that doesn't have juice going to it is for the instruments panel. Why doesn't the instrument fuse have juice? Does dash have to be in for instrument lights to work? I checked it with a volt meter. Might it be the wires going to the box...

Does anyone know what size holes need to drilled to put molding on from rear quarter window to rear window.And where can i get the clips that go into that piece.

I'm getting ready to install deck filler panel on my 1969 superbee.When i ordered the new one i thought it would have holes in it for trim clips.does anyone have measurements or pic. so i can put holes in correct spot. Thank You in advance for help.