Search results for query: *

I have a 67 belvedere with a 318 that came out of an unknown car, but according to the engine codes was built in late 1971. I upgraded to an electronic ignition, Edelbrock 1406 4 barrel carb, and an Edelbrock performer intake manifold. Do I need to adjust the timing for these parts? If so, how...

I have a 67 Belvedere with a 318 and a gas tank that was replace a couple of years ago. When I pump gas the pump stops every 15 seconds or so despite the fact that the tank is not full. I'm assuming this is some type of ventilation issue. Has anyone experienced similar issues? Any idea how to...

When I close the doors the dome light dims and the accessory light on the underside of the dash comes on. This happens when the car is off or on. In addition, the temp and fuel gauges aren't working. Both gauges are on the left side of the gauge cluster. The speedo and the gauges on the right...

It looks like there was a wire connected to the oil pressure switch. The wire is now just hanging there and the end is bare, no connector. I assume it was like this when I bought it. Am I correct in assuming that wire should be connected to the switch? If so, how is it supposed to be connected...

OK, so here's the deal. I have a 67 Belvedere II with a 318 that I believe came out of a 69 Dart. It's my first project car. It's been really hard to start and I ended up draining the battery trying to get it going. I recharged the battery (probably a year old at the most) and tried again but...