Search results for query: *

I am eliminating the boost retard box on my 6 AL system. So not sure where to connect the magnetic Pick Up wires from the distributor. There is a hook up coming out of the main box with 2 wires on it. But when I plug the dist into those it won't spark. I want to wire the system as intended new...

My voltmeter shows 16, sometimes * 16.5 volts going to the battery with the engine running. So I checked the field wire voltage at the alternator with the key on, motor not running. The field wire is getting 11.25 volts, with key on and the motor not running. Then I check battery voltage and it...

My 70 Dodge Dart automatic starts in all gears, should only start in neutral or Park. All the wires are hooked up, will even still start when I unplug it from the transmission. It appears the switch has been bypassed, is there any way to tell which wire is bypassing the neutral safety switch? It...

My 1970 Dodge seems to charge at 15 to 16 volts. Just put on a new alternator as the old one had the output lug break. Plus sometimes it will surge briefly and the lights will get real bright for a sec. It has the 6 AL IGNITION, MULTI SPARK. Can this ignition be causing a problem with the...

I have an aftermarket amp meter on my 69 RR, and it used to work fine. But ever since I changed the cyl heads to Aluminum ones, the gauge acts strange. When the engine revs past 1500 to 2000 RPM, the meter goes to pretty much straight up. But when the RPMs come down towards idle, it goes to...

69 Roadrunner, the left rear signal quit working. We tapped into the left turn signal wire coming from under the dash and hooked it to the wire going back to the left turn signal. Now when you put on the brakes the left dash T/S indicator lite comes on, as well as the front turn signal . But the...

Hi, still working on a 69 RR with elec probs. I noticed that there was no power to the fuse that says instr next to it. So I looked at the back of the fuse box and the feed line was disconnected. I ran a jumper to it, (switched 12 volts) and now the instrument illuminating lights come on when...

I am trying to get the fuel and temp gauges to work on a 69 RR that I just bought. The charge indicator wires were moved to an aftermarket amp gauge, would this affect the instruments? I already put in a good working voltage limiter. The turn signal indicator and brake indicator lites work, so I...