Search results for query: *

I've got 2 A/C pulleys for sale, both are for the common Sanden 508 compressor and are both new. 1 is a 2 groove v belt and the other is a 6 groove serpentine. Both are complete, pulley, coil, plate, etc. $60 plus the right each. PM if interested

I bought this brand new 2 years ago, I ran it 1 summer (about 2,000 miles) before swapping the 727 for a Viper T56 rendering this useless to me. It was on a 456 stroker where it did an excellent job (much better than the stocker that's on it now) but because of the bellhousing arrangement it...

I bought this fan before ever seeing a motor in my car..... will not fit in a 69 Charger! It's been sitting on the shelf every since and sells for $140-$150. $100.00 and the ride buys it, I'll post pics if needed.

Because I'm switching to a serpentine belt setup I will no longer be needing these. The fan measure 17" and is a thermal unit and has kept my 456 cool with no problems. The alternator is a Tuff, 100 amp 1 wire that is powder coated black and is a 2 groove v belt. The water pump is an aluminum...

I have a 489 center section that I just freshly rebuilt this year with all new Richmond 4:30 gears and bearings. Carrier half bolts were replaced with ARPs along with a crush eliminator kit as well. I put around 3,000 miles on them before deciding to go back to 3:55's and don't think I'll ever...

I'm making the swap to a 5 speed so I'm listing my recently rebuilt 727 for sale. I used the Hughes rebuild kit because it had everything in it including bushings and thrust washers so it's all new. I also installed a TCI bolt in sprag, B&M shift kit, a new locking dipstick and a Lokar throttle...

These are off of my 1969 Charger, they're in really good condition but the washers are a little bent. $25.00 and the ride Please P.M if interested

This either came out of a 68 RR or a 69 Charger but is in really nice shape. $15.00 and the ride please P.M if interested

Hopefully you guys know what this goes to because it was in a bucket of parts that I got when I bought a 440. I provided all the measurements so you can decide for yourself. $25.00 and the ride

These came off of a 1968 383 RR and are in very nice condition, the drums are even really clean with only a minor lip on the edge. $45.00 plus the ride please P.M if interested.

These are the drum spindles and backing plates that I took off of a 1968 383 RR. $45.00 plus the ride or $25.00 for the spindles and $20.00 for the plates. Please ask any questions, I can post pics with dimensions if needed. P.M if interested

These are the spindles off of a 1968 RR with drum brakes, great condition $25.00 PM if interested

I have a set of A Arms off of my 69 Charger that are in really nice shape, I'm sure the bushings and ball joints will need replaced. $25.00 plus shipping. Please PM me if interested seeing how I may forget to check this post.