• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Runner 68

    Air Cleaner to Hood Clearance 68 Road Runner

    Hello, old topic but I can't find the answer I'm looking for. 68 Road Runner, stock hood, low deck BB, TFS Heads and Manifold, no hood insulation. I ran into some hood clearance issues. I have a combination of a drop base air cleaner and 2.5" filter that gives me ~1/2" clearance between the hood...
  2. Runner 68

    Another Line Loc / Roll Control Thread

    Sorry to start another thread but it would be good to have some answers to an old question. I have read the existing threads on here but need some fresh comments. 68 B Body, 4 wheel manual disc, manual trans. Basically, is it ok to install the line loc solenoid right after the master cylinder...
  3. Runner 68

    Freeing Up An Engine That Has Been Sitting For a While

    Hello Gents. As some of you know my younger son just acquired a 72 Duster that has been sitting for a while, from a family member. It ran fine in 1989 when it was parked, outside, in dry Colorado. We have full access to it and will haul it back to the shop when we want to start the rolling...
  4. Runner 68

    68 Fender Fasteners

    Does anyone out there have any input or a blow apart diagram as to where the various fasteners go on a 68 fender? The fender bolts are fairly obvious but the stud and nut fasteners are confusing the hell out of me. I tore it apart quite a while ago and the pictures I took aren't as good I...
  5. Runner 68

    Best Wireing Harness 68 B Body

    I have been doing a little poking around on here trying to figure out what you guys feel are the best wiring harnesses for our cars. The consensus I came up with is that M&H / Year One is the best deal / quality / fit / correctness out there. Would you guys agree?
  6. Runner 68

    Under Carriage Coating

    Looking for suggestions on under carriage coatings for my Bird. The car has been media blasted, epoxy primer, the phase 1 body work is done, and will start finishing the under carriage first. I paid good money to have the old under coating blasted off and don't like the idea of simply putting a...
  7. Runner 68

    Broadcast Sheet sequence number vs the sequential number

    Can anybody tell me what the difference between the Sequence Number in the upper right hand corner and the Sequential Number under the VIN section mean? What's the difference?
Back
Top