• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. chtampa

    Hemi Oil Dipstick

    Who has the most OEM accurate Oil Dipstick for 69 426? I really don't need the tube just the dipstick. I could also use some of the heat sleeve in bulk. This is for my Gen 3 conversion where I am wanting to get away from the plastic "T" stick I have now. The factory is a spliced unit already so...
  2. chtampa

    8-3/4 Pinion Snubber, Adjustable

    This has holes going both directions to give 1/2 inch adjustments so if you car pulls the wheels too far off the ground you can level it out. Great safety feature if you race against Hellcats a lot. $30. Sale pending!
  3. chtampa

    SB 727 Valve body question

    I have a SB 727 trans and ordering a shift kit. The convertor is Turbo Action and I want the kit to be also. They list 2 different ones and my valve body is not from the existing case. I pulled the pan and the filter only and there was a number 4202528 on the bottom of the valve body. How do I...
  4. chtampa

    727 Fluid question

    I have a 727 transmission with a fresh rebuild and a few cases of this sitting around. Has anyone used it and had problems or good luck. I don't want to find out the hard way.
  5. chtampa

    727 Kickdown Arm

    Tackling the kick-down linkage of my Gen 3 5.7 and SB 727 combination. I am using the factory style bell-crank system to begin my modifications with. I have the pivot at the intake and then the one on the side of the trans and then the linkage goes to the kick-down arm. I have found 3 different...
Back
Top