Search results for query: *

i been doing some looking around and thinking on how i can use my poly even tho it has a bobo. it would seem that thay can be stroked and bored alot. like over 400 cubes. if im reading things right just about all the guts from a LA will work in the A block.., so why can't i use a 360 crank...

on the poly mills.... will a 62 up oil pan work on the 57-61 mill? or better yet. will the LA pan work on a poly??

when did thay change the spline count on the input shaft on the 727?

ok .. i can't find these numbers .... i know its a 318 V800 fury mill. but what do these numbers show??

ok ... im running the 822-16 hydro lifter but thay keep collapsing when running and ya can watch them do it with the cover off ajusting them. if wanted to use a solid lifter yall got any pointers as to what to use that is close to the same size (tall mostly) so i maby be close enuff not to...

ok .... 3rd set of comp lifters.... what else yall got???

full floating wrist pins on cast rods with no bushing on the small end?? should i pull it back apart and have it done?? really bugging me.

Ok... No bushing on the small ends So that makes them 318 rods? Right?

took the heads off the 413 and thay are 2406516-7 closed chamber. wasn't exspecting to find them on a 64 413. i always thunk thay were a 361/383 head. am i missing something? on a happy note ... took the heads off the 68 383 and there 906 heads. sadly has a big hole in a cly so much for that...

ok ... o been getting things together for Carlisle and have found more stuff than i rememberd even having laying around. (no 400 blocks tho) looking at stuff i got an idea of putting a 413 crank i got in a 383 block. i have been looking and found that diamond makes slugs for this using 440...

im haveing one hell of a time finding gasgets for this 69 slant 6 im working on here ... anyone got a part number or have a engine set laying around i could buy that ain't all shrunk up? felpro .. mr gasget ...... sealed power all show numbers but ain't no parts on the shelf

ok ....have yall found a drive shaft that will work when doing a slip yoke trans in lets say a 62 B body

put a 4.56 742 sure grip in my 66 B body ... it a fun set of gears but its way to low ... anyone wana swap for a 3.90 ???? im in central PA bedford co.