Search results for query: *

Hey guys I am building a 1964 fury into a super stock clone. I have a 426 street wedge bare block, anyways I am going to build the 426.. but I have a original mopar max wedge cross ram. I want to use the cross ram... but max wedge heads are tough to come by.. is there am iron head that can be...

I need some help with the ID on this block. It says 426 on the pad in the front with a V41 and hp and a few other numbers but the block casting numbers I looked up could be 413 or 426... what is it lol

I just picked up a 440 short block from my buddy for a really really good deal.. its a 69 block. 030. L2295 trw forged pistons. Line honed, decked etc. Ly rods. All arp hardware forged crank gear drive. Balanced. Set up for external oiling... never been fired... now the problem is the deck...

Hey guys I just got a short block from a buddy. It was built a long time ago and was never run. It has a roller shaft in it with the numbers 689356 on the back of it ..I took a pic of the scribed numbers on the front. Does anyone have any idea what it is the numbers on the front are ? 308R10...

I bought a 67 belvedere with a 383 in it and it had a head gasket leaking in it.. apparently this motor was " rebuilt " 12 plus years ago and sat on a stand.. it had steel shim head gaskets and when the guy fired it all the antifreeze leaked in the oil.. I am going to do a full tear down because...

I am on the fence about a motor for my new project. I have a virgin 400 block that's cleaned magged and ready to be machined.. I love assembling engine and tinkering.. not an expert by any means. The Mopar stroker stuff is new to me there are so many combos that make my head spin lol.. I have a...

I am in the middle of putting the comp cam 509 292 hydraulic nostalgia cam in my 383..915 heads. I have a set of Harland sharp 1.6 roller rockers. Anyone have a suggestion for pushrod length. I am out of town so I have no idea there are 2 different lengths from comp cams This being a newby...

I got a holley 750 on my 383. The motor has the purple 484 shaft in it, ported 906 heads, its a solid 10-1 motor. Set the timing at 36 total. Now this carb has always been funky, I had a buddy of mine redo it. He was supposed to be a carb guru, but now the carb doesn't respond a whole lot with...

What's the max bore on a 75-78 440 block?. I have a set of .055 over pistons. I can get this block cheap but is it worth it? I am thinking it's a thin wall block from all I have read. It will be a street motor so hard blocking it is out of the question. I have had 2 blocks checked and they were...