Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just scored a parts car that will give me what I need to finish the back-half of my 74 RR! The story here is that mine is rust-free, but was involved in a soft roll-over. So the lower 1/4's are great, but the upper 1/4's [with all the compound curves] are toast. I need to replace everything...
I dont think I posted this on FBBO before, if I did, I'm sorry. But it is finally time to start this job. The car is a 74 Roadrunner w/ sunroof. It had a flop into a ditch by the PO and there is roof damage. The car is going to the shop next week only to get checked out to insure the car is...
Starting to formulate the plan for 1/4 panel replacement. I saw that H.F. has some 220v spot welders. Does anyone have any comments on these? I will be using that [if they work] or plug welding. BTW, should I be using a "weld-thru" primer in the seams when spot or plug welding? Thanks, Scotty
I'd like to get the opinions of those of you who have worked with some of the new panel adhesives out there for patches and panel replacement. I work at SHAP [Sterling Hts Assembley Plant] and we use this on our cars [Sebring/Convert./ and Avenger]. At the factory we have done "peel tests" and...