Search results for query: *

I have a 69 Coronet 440 w AC and a perfectly good set of dash pads. I want to modify the dash to include an insert with better/larger gauges and wonder if I can retrofit an RT or Super Bee lower and middle dash pad onto my dash to gain the extra room above? I can't seem to find anyone that...

I guess more of a bitch session then anything else... had to get it off my chest. I found out I was missing the simple support rod that goes between fender and frame on right front quarter panel on my Coronet. Hit the web sources and called _ _ _ to get one coming. Sure enough they had it...

Just pulled the dash,column and brake assembly from my 69 Coronet and have a totally clean firewall. I have several different directions I am going but wanted to get the experts involved for my build. I am going for a rebuild ground up Coronet with better everything to somewhat replicate a Bee...

Removed the dash from my 69 Coronet and am staring at the original AC unit. I am thinking on removing it completely but wanted to touch base with the forum first. All of the AC parts were hooked up when I bought the car but the system wasn't charged so I never tried it...this IS ALASKA, it never...

One of the next steps in my rebuild will be to remove K member. I plan to put her on roller legs to continue the body work and restoration. In reading and listening to the chatter about torsion bars and how much they effect the ride/performance,I wonder how I should address this? I will be using...

The battery tray is gone with rust and the inner fender( engine bay) is cancered all the way down and must be replaced. This can be remedied with a new tray,bracing and some sheet metal. What are the "holes/windows" in the inside fender wells and what is their function? The driver side "hole" is...

My 69 Coronet came with 383 2bbl and my thoughts after reading all the info here is that this may not be as simple a swap as I envisioned. The whole drive train will be under a lot more strain from the 727 tranny on back to the small pinion 8 3/4 rear end. I have several questions: 1 Will a 440...

Need a little help to figure out what to do here with my 69 Coronet roof. The two crossmembers that support the roof have seperated from the roof and have a downward bulge in them. There is rust between roof and crossmembers which I want to remove before reattaching the crossmember. I don't know...

A simple question or two about windshield rubber replacement. I have pulled all the windows out of my 69 Coronet and was told to leave the original rubber/seal on the car (not clean that area up) as it "already conforms to car and fits to the windshield" by a freind who does windshield...

Well, sub frame connectors are in and look pretty good. Did the POR15 treatment on just that area and will address the rest of the underside once I get the sandblasting fine tuned. Had issues with the pot/grade of media and pressure needed...took some experimaenting to get it worked out. Added...