• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. wagonman

    Cummins 10-40

    We have been lucky so far with the supply chain BS till now. Went looking for oil for my 92 first Gen Ram and there is NADA oil out there. Auto Zone Oreillys Wallmart Ect are out with no projected delivery date. FJB.Guess I will see if summit has some to ship. Also been waiting on some American...
  2. wagonman

    Arroyo Seco Raceway

    With the move to New Mexico coming up I started looking for a local Drag Strip, low and behold there is one about 15 miles from the new house. Any Members been there? Looks like a Mom and Pop outfit with no major sanctioning body. Looks like Deming has a NY style pizza joint also. A slice and a...
  3. wagonman

    GYC projects

    Down the street from our shop. Waiting for the dipper. The vert is rough.
  4. wagonman

    Fixed it, well Maybe.

    On a previous post I chimed in about a fuel starvation on my car. Thought I picked up some H2O giving me a surge and power loss. Well I found the issue. I have a fuel pressure gauge at the carb and it has always read 6 psi. So I took it on my usual ride and sure enough it fell flat and damm near...
  5. wagonman

    Non A/C blower Sw.

    So I stop by a buddys house who has a 68 Charger and he is redoing his heater box, controlls ect. His last tidbit is the blower switch with the harness to the resistor. Asks me if I might have or know where to get one, says he cant find. Tell him let me look see in my pile, might have one. So I...
  6. wagonman

    Slider ashtray.

    Digging through some parts for the upcoming Portland Swap Meet and have a slider type ashtray. This is the part that attaches to the dash not the pull out. Got a # on it L-4162, whats it fit???
  7. wagonman

    Balljoint sockets

    Was at the Albany Or swap meet last weekend and scored 2 balljoint sockets. Herbrand # 2429 for the uppers I am sure of and a 2430. Both 3/4 drive and like new. What dose the 2430 fit?
  8. wagonman

    How much to cut?

    Got all the stuff to convert to PS in my 68 Runner. I know it has been done before, so how much do you trim off the manual shaft ?
  9. wagonman

    Another fuel sender rant.

    Shaking down the 68 for the Reno trip, filled it with 93 premium and heading home the fuel gauge pegs past full, way past. Pulled the sender wire at the tank goes to empty. Ground it and goes to full. I have my 5 volts at the wire so wiring and gauge are good. The new sender never has read...
  10. wagonman

    Splash shield W/S where to buy

    This is for the shields that are attached to the rear of the front fenders. I have the horseshoe looking ones from DMT but need the ones that are about 2ft long. Any help appreciated.
  11. wagonman

    Hood insulation Qs

    So I got a molded hood pad and the fit is terrible. The hood looks like an Air grabber from a 69, still has the old rivets in it. Could this be the problem? Holes line up on the left outer side but not the Rt, off about 1/2 inch. Guess they did not use a pad with Air Grabber hood?
  12. wagonman

    383 ID

    Casting # 2468130-8. Rail # 0E129(or8)177. Dist pad F383 1 7 2 HP. Thinking E body??
  13. wagonman

    Vent window hardware source?

    Looking for the 1/4 x 20 phillips head screws about 2 1/4 inches long that secure the vent window. These go through the door shell and are visable. They screw into a loose plate on the inside. The hardware store stuff has a head that is to big and looks like crap. The big yellow plymouth resto...
  14. wagonman

    68 R/R bumper guards

    Anyone got some pics on the F&R guards for a 68 RoadRunner?
  15. wagonman

    68 R/R ashtray

    Howdy folks, I am looking for the removable part for my 68. I have seen on the Bay a slider type but mine is the pivot type. Seems like these are a 1 year only unit. Any info or leads would be appreciated.
Back
Top