Search results for query: *

All new rear end bearing in my 9 1/4 b body rearend. . Rear Breaks are overheating. Readjusted several times, new pads. Pad don't look or match the factory photo. Rechecked with NAPA for a different set, Pads are the same as installed. If I drive it 10-15 miles I can smell the break pads...

71 Charger SE: Need some advise on converting from drum brakes to disk brakes on a budget

Need to purchase a new big block 917 oil pan for a 74 dodge charger. Vender's sell the early 440 pan. Pan will not clear the newer k-frame. If you have a good source, please advise.

Planning to convert a 73 charger to bucket seats with a console. Existing steering column has no key. In the meantime I need parts from another column, but I need advise on how to remove the key cylinder from the donor column Thanks

Can someone direct me to a previous posting: Black with red 73/74 charger. Owner replaced right quarter panel and rear floor pan. Appears someone covered the quarter panel with 2-3 inches of body filler, painted the charger black and sold it to current owner. His posting was originally...

Having difficulty locating a 971 oil pan. 440 and 400 magnum options came with this oil pan. Ordered two from differ sources. Problem with both oil pans would not clear the K frame. If you found a vender with a duplicate or factory style pan, I would appreciate a response.

Unable to locate a set of motor mounts for a 74 dodge charger with a 440. Rubber insert are available but not the complete left or right brackets. Checked the typical Mopar sites, anyone know of a source? Thanks

Checking with the group to ask if 71 charger with rallye gauges with wiring harness will function in a 73 charger. Plan to replace the horizontal unit the rallye gauges. My concern is the dash wiring harness to the engine bay and tail lights. Do I need the wiring harness from the engine bay...

Planning to install a 69 383 to replace the 400 in a 74 charger. Noted the motor mounts are differ. Any suggestions or recommendations. Thanks

Friend purchased a base model 72 dodge charger. Along the side of the rear top (both sides) are four holes typically used for an SE emblem. But this vehicle has four horizontal holes on both sides . Does anyone know what is installed at this location. Thanks

Need advise on a 71 power steering gear box. I believe 71 and 72 are the same, but what about earlier or later units or "C" body units. Friend picked up a parts car, missing the gear box. He checking but does not want an after market unit, prefers to rebuild a similar unit thanks

Like to change out my 73 charger steering column with a unit from a 78 dodge magnum (title wheel). Main concern is the steering electrical cables. Do I need to reuse the original cable harnesses. Thanks for your responses.

Checking if anyone has a set of charger coupe rear side windows complete. I need both sides for a project vehicle. Not SE style. Sent PM if you have the glass, crank, and guilds to sell.

Borgeson offers a small steering box conversion for 62-72 mopars. Has anyone installed one on a later (73-79) b-body? If so please provide some details Thanks

Need your help regarding 71 and 73 dodge charger rear side window glass and related tracks and hardware. Basically need both side for a 73 charger. May have access to units from 1971 charger. My question is are the window systems inter-changeable? Happy New Year--Thanks for your help..

Just want to share a recent experience. My son was driving my 75 Cordoba with 15 year tires to his wedding for photo session. Tires are 245 60 15 TA tires. Driving 80 miles per hour the complete tire treed came off causing the vehicle to turn toward a wall, after recovering from a near miss...

Perfect for 1973/74 bumper relocation to eliminate the rubber insert between body and bumper. $200. Price includes shipping to US location. Send PM if interested

Planning to look into replacing my original 74 charger RB block AC system with an after market system. Recommendations?

Checking for a location for bumper re-chroming in the $500-$600 range. No shops in Colorado, some in Texas and California. If you have some recommendations, please send PM

1973 Charger SE: Planning to install new door and window seals to include the felt strips. If anyone has a good source please let me know. I've heard mixed reviews on the hardness and fit. Thanks