Search results for query: *

402 big block oil pan. This is a Chrysler pan and NOT a Chinese made unit. I'm including a windage tray in the deal. These parts are very clean and ready to use. $175.00 plus shipping from 06484.

"216" fan 18 1/2 inch diameter in excellent condition. I carefully inspected each blade on this fan. There are no dings, bends or creases. This fan is a very straight unit. The shaft on the clutch moves nice and smooth. Part number is 2658456. 67 - 72 B-body E-body with A/C. Nuts and...

This mini starter is being swapped out for the correct (restored) Chrysler starter. It was loaned to me from a friend who does not want it back. This mini starter is no longer needed. It has 870 miles on it. I want to point out that the sticker and the surrounding painted area appear to have...

This voltage regulator was used for 1 season. I no longer need it because I changed the electrical system. $10.00 plus the ride from 06484.

7 blade 18.5 inch Fan in good condition. Clutch is nice and tight and smooth. $90.00 plus the ride from 06484.

Here are 3 ballast resistors (2095501) that are in excellent condition. All 3 resistors have been tested with an ohm meter. All test at .7 ohms. All 3 brackets have the part number stamped on them but one is extremely faint. I needed a magnifying glass to see it but the number is there. The...

This is a new voltage regulator part number P3690732. I bought it awhile back "just in case" and I never needed it. $45.00 plus shipping from 06484.

This is a used, very clean, very straight and dent free "402" oil pan for a big block engine. I want to be very clear that this is an original Chrysler pan and NOT a cheap Chinese made knock off. The baffles inside the pan are intact, solid and straight. $180.00 plus shipping from 06484

This is an 18 1/2 inch "216" fan. Unit is in really nice, clean condition. 2863216 is stamped on one of the blades. See photos. $85 plus the ride from 06484.

Here is a complete and fully functional jack assembly for a 66-67 Charger, Coronet, Satellite and GTX. 4 piece set. You're getting the jack, the base, the hook and the lug nut wrench. $120.00 plus the ride from 06484. Paypal F&F, money order, personal check. Thanks.

This is a very original 2863216 18" diameter fan. Ink markings are still present. Each blade is straight and the rivets are tight. Minor surface rust is present. The clutch looks to be an aftermarket unit. It spins with a nice, tight feel like a new one would. $95.00 plus shipping from...

Here is a VERY clean and complete Carter AVS 4bbl carburetor that was removed from a 71 Charger R/T 440. There are no missing parts except for the idle solenoid. All the linkage and butterflies operate very smooth and there is no play in the throttle shafts at all. This carb is like brand...

Here we have a nice used 18.5 inch 2863 216 fan with the 070 clutch. This assembly is a very nice, clean and straight unit. All the blades are very tight where the rivets attach. Each blade has 2863 216 stamped in it along with the pentastar and 46237 marking. The clutch has a nice, tight...

This is a VERY clean used ballast resistor that tests .07 ohms. 2095501 is the part number stamped on the bracket. $28.00 and free shipping to 50 states from 06484.

I have 2 used, very clean and operating ballast resistors. I tested both and they read .07 ohms on my meter. The porcelain on both are clean and free of chips and scratches. The brackets are nice and straight with the part number (2095501) being legible on both. $35.00 for the pair and I'll pay...

This is an NOS Mopar ballast resistor (NOT a repop). The part number is 2095501. It is for Mopars up to 1972. It has never been installed in a car. I tested the resistance with my meter and 0.6 ohms was the reading. The plating is very nice and the part number (2065501) is clearly marked...

I bought this 904 trans dust cover from Year One many years ago (by mistake). I'm never going to use it because it doesn't fit anything I own. It is new. See pics. $70.00 plus the ride from Shelton CT 06484.

This is a used, excellent condition gas tank for a 68 - 70 Body Dodge or Plymouth. It was pulled from a 48,000 mile Super Bee in favor of a fuel cell. This gas tank has zero rust, no dents and does NOT leak. It is extremely clean inside. You should be able to tell by my pics how clean this...

This is a used factory push rod for Clutch Pedal to Z Bar that was removed from a 69 Dodge Super Bee. It fits '66 - '70 B Bodies. Overall Length is 13 7/8". It is in excellent condition. $40.00 plus the ride from Shelton CT 06484.

This is a new clutch fork for a '66 - Up B & E-Body Big Block, Small Block. $55.00 plus the ride from Shelton CT 06484