Search results for query: *

Bought heater hoses for my 67 GTX. They have 2 different part numbers stamped on the hoses, I guess one is input hose and the other output. Does anyone which part number should go where?

Now that I had to remove the water pump housing to remove a frozen plug and the heater nipples I’m going to get a new water pump also. Looking for feedback if indeed there is a better water pump for cooling than just getting an air Tex from auto zone. For a 67 GTX Hemi

1967 Hemi GTX, what would be the correct fan blade. It currently has a 4 blade fan. Last weekend I was out to a show and ran into a fair amount of slow moving traffic, very hot out. Thought it was going to overheat, really close, as soon as I got moving temps come right down. So I'm wondering if...

I’m rebuilding my heater case in my 66 Coronet. Does anyone reproduce the rubber gasket that goes in between the blower motor and it’s mounting plate? Mine can be reused but one tab where the stud passed through is separated from the gasket, and of course it’s pretty hard and dry. I’m also...

This relates to my 67 GTX with factory air. Heat output (temperature) is fine at idle and low engine rpm speeds ,say below 2500 rpm. Once I'm at highway speeds and rpms are around 3000 or better the temp gets cool right away. Stop for a traffic light , you feel the air temp warms up right away...

I have the factory service manuals but I'm not crazy about the vacuum diagrams for the heater evaporator case. So I was wondering if any member made their own schematic of where each hose goes. Each pair has a white and red stripe, I always wondered if for instance all the white stripes go to...

Does anyone rebuild/restore the a/c vacuum switches?

After the overhaul of the hvac system on the 67 gtx I noticed that my high side ac readings are much lower than they should be or that I expected. 50 psi. System seems to be working. I replaced the drier, compressor, expansion valve, flushed and leak checked the condenser and evaporator. Only...

service many says you can do it, but as soon as I start to loosen the oil fill plug I hear hissing. scared if I remove it, I will make a huge mess. Has anyone ever attempted this?

Is there any difference between the quality or function of the 2 popular brands of aftermarket A/C kits Classic Air and Vintage Air? Has anyone had good or bad experiences to share?