Search results for query: *

Im looking at installing the quick ratio arms and my Belvedere . i have a rebuilt ps box from Firmfeel. some sites say it fits my car and on others no , the way the pit man is made differs from oe. the parts that attaches to the subframe is different . and if any one has insatlled them is there...

I m looking for a supplier for a gm chrome hydroboost jl farication has no stock does anybody know if there is someone out there that has one its for 1956 belair ls3 500 hp

i just had my box redone by firm feel and bought there upper a arms came with bump stops. they are solid hard no bounce ,so it bangs hard . prothane makes some like the oem ones , any body have any luck the roads here are riddled with pot holes , it insane how bad they are 4 inches deep by 2...

how is your line lock installed, does have to be before or after the proportion valve or does it matter

i just bought mopar performance t bars . they have writing on both ends but on one of ends are painted does it matter if anybody know witch way goes in front they say left and rt but not frt to rear

I can get mopar performance torsion bars from my local dealer for 150 Canadian I have a 225 six with no a/c and I'm putting on a overdrive gm transmission. so heavier than the original torqueflight. summit shows the option for b body as .920 and .960 what would you recommend do I go with the...

I'm wanting to buy a line lock for my b body , anybody recommend a brand on ebay they go for like 60 $ , I noticed this warning on a site Notes: Should not be engaged for more than 60 seconds. why ??? any ideas

anybody ever install a steering damper on there mopar if so lemmeno what you used

is there any reasonable(priced) shocks for the front of my belvedere. i find it very boaty and soft , i have the slant six in there with p/s and wondering is the car just like that on the highway, the steering box is from a dodge diplomat and i used a the pitman arm from a mid 70 dodge ( i...

any body covert the steering shaft to a ujoint to the steering box if so where did you get it from my belvedere I convert to p.s. I had to cut the shaft any way , so now I would upgrade to a u joint for smoother steering and less slack

So i'm installing the dodde diplomat diff with the new energy suspension insulators the 67 has 1 more leaf than the diplomat , so i made a shim to go between the brackets so they clamp on each other. i am doing a pre assemble on the stands to see the fit. there is some play side to side with the...

Now that i have my engine and tranny out. i am going to replace front suspension bushings and rear spring eye and shackle bushings who recommends what . I'm not racing just a 225 auto in my 4 door belvedere and what brand does any body recommend Thanks