• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Bill Monk

    Distributor help

    I need to replace the vacuum canister on the distributor. I assume I will have to take it off the car to replace it right? Either way, can somebody give me a step by step to do this. Never took one apart.
  2. Bill Monk

    More @#%&* wiper trouble

    I bench tested the motor and it works fine. I replaced the switch, hit the button and the wipers worked. Problem solved right? Not so fast, the next time I turned them on, the wipers moved but at a snails pace, like barely moving at all. When I turn the switch off, they park normally and at a...
  3. Bill Monk

    popping from exhaust on deceleration

    First, let me say I appreciate everybody that has taken the time to give advise to me on this site. It has proven to be an invaluable tool to diagnose problems so thanks! Now to the problem: Engine has a slight hesitation at low throttle but runs like a scalded dog when you step on it. When I...
  4. Bill Monk

    MALLORY DISTRIBUTOR

    Anybody know any Ford guys that could use this? Mallory ZC343G, No idea on condition.
  5. Bill Monk

    Spark plug wires (that fit)

    Looking for recomendations on plug wires. I don't race it but I do want a good spiral core wire and good fitment and not a foot too long. I run stock manifolds. Chime in please. Thanks
  6. Bill Monk

    vacuum advance???

    Just bought a distributor and ignition box from 4secondsflat. This is a quote from their tech instructions: "Hot Rods, Muscle Cars, Classic Cars or nearly any performance application the Vacuum Can is connected to the CONSTANT Ma nifold Vacuum source. Doesn't matter what you read on the...
  7. Bill Monk

    2 speed to 3 speed wiper motor swap

    I've looked through the threads but still can't find an answer to my question so here goes: Somebody swapped a 3 speed motor into the car before I got it but kept the 2 speed switch. The wipers are not working so I'm working on this blind. I picked up a 3 speed switch because I figure that...
  8. Bill Monk

    MSD READY TO RUN DISTRIBUTOR

    Anybody running one of these? What springs are you using for the mechanical advance? I have a basically stock 440 6bbl. Based on MSDs chart, using a light silver and light blue spring would bring all mechanical advance in by a little over 3000 rpm which sounds right but I haven't bought one yet...
  9. Bill Monk

    Starter wont turn

    New to the site but not to Mopar, had em when you couldn't give em away, now you have to mortgage the house! I'm stumped on this one people so here goes: 69 roadrunner, original 383, now with a 440 6bbl. Original 4 speed car, still is. Just bought this car and already loosing more hair. Starter...
Back
Top