Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a very nice 1968 Road Runner Sparton Horn. It works as it should because I tested it with a 12v power supply. The paint is also very nice.
It looks as if it was installed then removed quickly because signs of age and wear are minimal.
Price is $100 plus shipping from Milford, MI 48381...
I have a very nice used working 1968 style Road Runner horn that is:
- OEM
- Long Bracket
- Black
- SPARTON
- MODEL SA
- MADE IN U.S.A.
- Date Code 218
I tested it with a 12v power source. It is extremely clean with no rust. The paint is not perfect. It is fine “as is” for a nice driver or...
This is an NOS piece. Note the lack of bolt witness marks and it appears the original factory grease is still in place. There are some minor scuffs.
It is an external release hood latch that requires the drop rod. I believe this is correct for 1971-72 Satellite Sebring, Road Runner and GTX...
I have two pieces of p/n 3464344 Dodge Charger front license plate bracket. These are for 1971-72 models but I believe they will fit 1973-74 models.
These are NOS but I had to refinish them due to years of shelf wear. They have been professionally powder coated. I installed new stainless...
I have a pair of Charger SE wreath emblems for the sail panels. The chrome is pitted to varying degrees and the vinyl color inserts are missing. They are not broken. I am asking $30 for the pair plus shipping.
I believe this to be a 1970 Dodge B-Body hood latch. It is NOS with some shelf wear but it is a nice piece completely free of wear and corrosion.
Please offer any correction to the application of this part. The packaging shows this to be 3695872 but I am not sure the package is original to the...
I have a pair of 1972 Charger Rallye doors with hardware. I am listing them for $1500 OBO. The RH door has damage to the lower rear corner corner but is repairable. Someone used too much filler with minimal metal work which is a bad combination. The door is otherwise free of rust and other...
I have RH rear side marker light openings for a 1971 Charger. They will be handy for that 1971 project requiring modifications to 1972 sheet metal or repairing 1971 quarters. I will cut to your dimensions for ease of shipment. I am asking $25 each plus shipping.
I found an NOS pump for my car so I never used this one It fits many 1967-1978 Mopar models. Check photos to make sure it fits your application. Do not hesitate to ask questions. Prices on these run $30-55. I am asking $35 shipped within the U.S. 48 states. I will need to calculate...
I have a used RH lower full vinyl top trim molding that will fit 1971-72 Road Runner, GTX and Sebring models. Overall condition is very nice. Some buffing will remove the light scuffing on the surface. The only repair required is due to someone tapping on the flat open end and curled the edge...
Price error...corrected now.
I have a LH full vinyl top rear termination molding for 1971-72 Plymouth B-Bodies . The part number is 3504 979. The chrome surface is very lightly pitted (fogging). It is not broken. The fastener tang has one small corroded spot that is not visible when installed...
This is a nice piece but apparently not priced to make a sale. How does $50 plus shipping instead of $65 sound. Any takers?
I have an OE 1971 Road Runner/GTX Tail Light Lens (black trim). It is used but it is in very nice condition. I would respray the black trim and polish the lens...
I have an NOS RH "check" trim for 1971-76 Dodge Coronets. I believe this will also fit 1977-78 Dodge Monacos. The casting part number is 3504782. Absolutely no shelf wear. I am asking $35 plus shipping.
I have an original tail light lens set for all 1971 Dodge Charger models except R/T. The lenses are in excellent condition. They are clear and free of cracks, chips and yellowing. The original factory screws are nice too. The part numbers are 3478680/1/2/3/4/5. Some plastic polish will make...
I have a set of 1968-69 Dodge Charger NIB reproduction front and rear bumperettes. The rears are NIB and are very nice but someone removed the fronts from the boxes and they have some light "shelf wear". I am willing to separate fronts and rears. I am asking $50 for the front pair and $75 for...
I have a set of professionally polished stainless steel external windshield header trim moldings. These will fit 1968-70 Dodge and Plymouth B-Body convertibles. They are ready to go on a restoration or extremely nice driver. They were salvaged from a car that met an unfortunate fate. I am asking...
I have a good pair of 1971-72 Dodge Charger front bumper guards. The rub strip rubber is very good with nicks from road debris being kicked up over the years. The bottom stud is broken on each rub strip (my fault). The chrome on each guard is good with some fogging. These will be at home on a...
I'll try again. I have a set of professionally polished stainless steel external windshield trim for the header and A-Pillars. These will fit 1968-70 Dodge and Plymouth B-Body convertibles. They are ready to go on a restoration or extremely nice driver. They were salvaged from a car that met...
I have 2 NOS bumper guard rubber inserts, p/n 3464358, for a 1971 or 1972 Dodge Coronet. These parts are very nice. The only imperfections appear to be from the rubber molding process and handling. A perfect remedy for freshening the front end of your car. I am asking $30 plus shipping.
I have 2 used 1971-72 Dodge Charger front bumper guard rubber inserts. The rubber is not cracked or torn and remains soft. There are some minor nicks and scuffs in the rubber surface so these are nice driver quality. The bottom stud on each insert is broken. I believe the studs can be...