Search results for query: *

Hi does anyone have the larger 12" actually measured as 11.75" pin type brake caliper brackets for sale? I received a project car and it has all the parts (brake caliper, rotors, and pads) but no brackets. Can be off of any car but a C Body. They use a wider bolt pattern on the spindle. I can...

Hi looking for the dash emblem that goes on the passenger side for a 74 Plymouth Roadrunner. Can pay via paypal or venmo and need shipped to pittsburgh pa area. Thanks!!

In search of a set of B engine big block rods. Looking for the eagle rods or something similar, that are 6.358" in length and bushed for the 1.094 wrist pin. Need shipped to the Pittsburgh pa area. Thanks

In search of a JW Ultrabell for a big block to 904 transmission. Will pay via paypal immediately. Thanks in advance!!

Racer in need again :| Looks like Covid has hit me in the nuts again wi1th this project car. I'm looking for an ARC (Auto Rod Controls) 1430 fuse panel with the sounding alarm for a blown fuse. The alarm is why I want this model but neither summit or jegs can get it from ARC and ARC has none...

Hi Looking for a Strange Spool 35 Spline for the Chrysler 8 3/4 rear axle. Part Number is D1557. Will pay via paypal. Thanks!

Hi looking for performance gear ratio ring and pinions for the 8 3/4 axle. It does not matter if its the 742 or 489 case. Manufacturers no longer make these ratio's (5.38, 5.57, 6.14) for the 8.75 and I am unable to find someone that can make me a 1 off ring and pinion. Thanks!

Hi looking for the shumacher tacbrackit. I just like that no holes need to be drilled. I had one years ago and now wishing I didn't sell it. Thanks

Looking for the black plastic cover for a csc turbo action cheetah shifter. Figured I ask here before ordering a new one. Can be the model with or without switches. Thanks

Looking for an Helgenson E tool to measure the pushrod pinch wall thickness for cylinder heads. It looks like finding this tool is darn near impossible. Looking for something similar or even homemade that will work. Need it because I am porting a set of r/t cylinder heads and was smoothing out...

Probably a long shot but I am looking for the camshaft that comes in the 380hp 360 crate engines. the part number is P4876348 and it is a hydraulic roller. Thanks!

Well stimulus check is here. Been looking into a scat rotating assembly but before I spend the money on a brand new setup. I wanted to see if anyone here has any stroker kits (Rotating assemblies), a 440 crank grinded down to a 400 main size to make a 451 stroker. This is probably a long shot...

Hi i am looking for a ring and pinion 5.57 gear ratio or 6.14 gear ratio for the 8 3/4 axle. I believe they were old direct connection products. I can't seem to find any new and I know they exist. If anyone has one for sale please contact me. Thanks