• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Builderguy

    Replacement fenders

    I have a chance to buy a set of Dynacorn front fenders (for a 70 challenger) at the price AMD wants. I have never used Dynacorn, but from my research they are of higher quality but also come with a higher price point. As a side note, I have checked out/or used the other major brands (Goodmark...
  2. Builderguy

    NOT MINE: 1971 RR fenders and parts off FB

    PARTING OUT 1972 PLYMOUTH SATELLITE SEBRING PLUS- READ THE AD -4/29/23 UPDATED Listed in Chicago Ridge, IL Details Condition Used - Fair IF NOT LISTEDBELOW I DO NOT HAVE IT! PLEASE READ AD FOR WHAT IS AVAILABLE AS OF 4/29/23 Body: 1971 Roadrunner fenders, header, wheel trim, side...
  3. Builderguy

    73 and 74 Roadrunner trunk weatherstrip help needed

    I have literally over a 1000 pictures of my Roadrunner but I don't have a pic of the trunk weatherstrip. I could make to 45 minute trek to check out the other one but that would burn 2 hours that I would rather use on assembly so help is what I need. Here is a pic of the old weather strip, so...
  4. Builderguy

    Door hinge to body. Sealer or just primer?

    I have read in several places that Ma Mopar would brush on a green primer between the door hinge and the body. "When you take the doors off you see a green primer between the door hinge and the body. This was brushed on in several areas to prevent rust." Mopardiy.com My car is a 1973 RR and...
  5. Builderguy

    Dash paint (speaker and defroster area) do you clear coat this?

    I found the color I want for my dash/speaker/defroster area on my '73 Roadrunner. My question is do I have to protect this paint with a matte clear coat (or similar) or is it good to go right out of the can? I have not had to do this before so I figured I would ask those who know. IDK maybe I...
  6. Builderguy

    Just saw this rear window for 68/69 B-body (Not mine)

    It is only $100 so maybe someone can use it. https://detroit.craigslist.org/okl/pts/d/troy-plymouth-dodge-body-rear/7216283840.html
  7. Builderguy

    BC/CC exposure to freezing temps

    My shop is heated and stays between 65 and 70 degrees in the winter. I can spray BC/CC at that temperature without any problems. My question is, "How long do I have to let the paint cure before I can roll it out in the freezing temperatures without risk of damage?" I did a quick search on...
  8. Builderguy

    Need some survivor paint information

    This is a 73 RR door latch mechanism. Trying to find out if the screw (left side) was body color and the two bolts, black (that is the way I remember but that was a long time ago). Then again, maybe all three were body color, or the screw natural and the bolts black, I don't know so I thought...
  9. Builderguy

    Need a little help with 74/74 Roadrunner hood

    Working on the hood for a 73' Roadrunner and there is a brace that looks bent. Underside between the cowl vents looks like this right now. Anyone have a pic or could take a picture of this brace as it should be. I am thinking it should be straight, but maybe it has a bow to it like...
  10. Builderguy

    73-74 Body bumper kit trunk and hood

    Anyone use this kit on their ride? Just wondering about the quality. Claim they are licensed looks like by Mopar...
  11. Builderguy

    Undercoating, help explain this please.

    Car is a 1973 RR from Canada with factory undercoating. I don't why this strip was left the way it was. One of my shop helpers may have pulled something off, but no one remembers doing it. Maybe the PO removed something and then parked it. IDK The PO drove it to a spot in the yard and then...
  12. Builderguy

    Quarter glass weather strip seals, looking for these.

    I have been looking for these 1/4 glass outer weather strip pieces. They belong on a 1973 Roadrunner. I think the original part # was 3582 264 & 5. Detroit is out of stock, SoffSeal doesn't have, nor does Steele. Metro maybe but hard to tell from the pic. Need to be flocked I guess. Any...
  13. Builderguy

    Question on sound deadening spray

    I need to spray some sound deadening material on the inside of the trunk on a 73 RR to match repaired areas to the existing material or just re-shoot the whole area. My question is one of adherence to epoxy. Normally would just scuff up the metal and spray but this already has deadener on it...
  14. Builderguy

    LEAVE ALONE OR MAKE IT BETTER?

    Working on this car for some time now and I want it to be really well done but it doesn't have to be perfect. It is getting BC/CC so it is already not "perfect" and it is not a high $$$$$$$ car to start with so I have to draw a line somewhere. My question is,"Do I fill the factory lead seam...
  15. Builderguy

    Engine compartment paint SS or BC/CC

    Getting ready to spray my engine compartment this weekend (still a touch more work to do). The plan was to do the engine bay and inside the trunk with SS. The engine bay will be epoxy primed before painting. My question is, what is better SS or BC/CC. Maybe one takes the heat better IDK so I...
  16. Builderguy

    1973 Roadrunner trunk weatherstrip retainer

    I am trying to find the metal trunk weatherstrip retainer (I think it is # 3346 530). It is the metal strip running along the trunk, by the lock, that keeps the weatherstrip in place. Mine is rusted out and I would rather buy one than make one (starting to run a little short on time). Anyone...
  17. Builderguy

    Door VIN tag R&R

    Has anyone had any luck peeling this tag off and then re-applying it after new paint. It looks like it will peel off without damaging it. Is there some new adhesive that can be sprayed on the back to make it stick again? Normally don't do the jambs so I am not too familiar with the R&R on...
  18. Builderguy

    1973 RR headlight bezel screw clips

    Having a little trouble here. I need these screw clips and can't find them anywhere. Okay, I found them but they are not available anymore from that supplier. The clip pictured is about 3/16" space away from it's mount. In the photo with the bezel in place it looks like there should be the...
Back
Top