Search results for query: *

I'm going to be removing my front bumper, '67 Coronet, to facilitate lifting front end to drop engine/trans/K-member assembly. Is it necessary to remove bumper guards and cushions 1st? Manual only says see Fig 12, 13 n 14 for attaching points, gives no further instructions.

Does anyone make a RH non-remote mirror for '67 Coronet 440? I'm sure it would be the exact same as on station wagon and tow package. I'm doing a lot of towing my boat to the river and backing down is very difficult only seeing out of driver side and almost impossible in the dark. I found 2 on...

Ok, I have all wiring issues in and out solved. Except the reverse lights. Removed the plug and used a jumper and reverse lights come on. Removed the switch and then looked at the Service manual and it shows an "operating lever" on the steering column that would push the red spring loaded button...

This is on my 1967 Coronet 440 4dr. Tun signal flasher per FM "The turn signal flasher is a plug in type mounted to the right of the steering column, under the instrument panel" page 8-75. I looked under there and don't see anything. Do I need to remove something from the dash or the a/c...