Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Need two axles, 30 splined ends, 6 inches long.
If you have a pair of axles sitting in your scrap pile and could cut off the splined ends and send them to me, I'll pay for your time and shipping.
TIA
Looking for a NEW 3:23 ring and pinion (10 spline) for the 742 case. (Pre 1969)
I'm not interested in a used set. I know who has new sets. I'm just asking if someone might have a New set that they have decided not to use and would be willing to sell.
I'm missing the original screw for the headlight trim on a 1962 Dodge.
The screw goes here (red arrow) or there might be other applications for the same one.
TIA
Looking for a 19 tooth speedometer gear for the pushbutton trans.1962-1965 Torqueflight I know there are outfits out there that carry these. I'm looking to buy privately first. Used is fine as long as it's in good condition.
They look like this one. Except 19 = dark blue part #2204 358 19DB
TIA
Looking to find a steering wheel that is in better shape than the one that I have. I believe they used this style wheel in 1963 also. Check out my pictures for a reference.
Color isn't that much of a problem. I'll have to paint to match. The same color would be better. No cracks or minimum...
I'm looking for a gas tank filler tube for a 1962 Dodge Dart, Polara ect.
If used, it needs to have good galvinizing inside and out. Please no rust.
Jim's Auto has them, way to rich for my build.
I ordered one from Mega and they are back ordered.
Please PM me with what you have or if know...
Looking for a 1962 413 engine. Second choice would be a 440 engine. Found a crack in the 413 block that I wanted to rebuild. A rebuilt short block would be ideal. Anything else would have to have been already cleaned and magged. Would also like to find something fairly local.
Thanks in advance!
Looking for the inner sill plates (carpet trim) for a 1962-'65 Dodge "b" body. They look like the two outer ones in the picture. I have the ones shown in the center of the picture ( they go on top of the sill).and would trade for inner trim.
I'm looking for any and all of the stainless steel trim that goes around the front grill. I'm not interested in damaged or dented pieces. Minor scratches would be ok.
Thanks,
Khryslerkid