Search results for query: *

This local show had a nice mix. Met @MW 413 and his son. Good guys for sure!

Trying to make up my mind on this distance. Worked out at 3/4" at the bottom, 1-1/2" at the top. Leave it or shorten the fan extension?

If I'm useing a break-in oil for the first start up, do I need to use an additive too? (Hydraulic flat tappet build). Would that be overkill? Also how long do you leave the break-in oil in the engine? I've heard some say just for the 20min. cam break-in. I'm going with a semi synthetic oil...

I have a, like new, Professional Products #90013, and have heard a lot of negatives about them. So I'm changing my mind about useing it. It's just a mild build 440, forged crank. Probably useing the pre '72 pully, and I am looking at the 440 Source $99.00 stock style dampner. Not out to break...

What's the smallest part that left you sitting on the side of the road, or gave you a fit, trying to fix a problem? Or in my case, trying to finish a build. I finished all of the machine work on my heads in order to change to a different spring. Had to wait for a back ordered set of springs...

What should the head gasket bore be for a .040 over cylinder. (4.360 cylinder) 452 heads. I see gasket bore measurements but not any reference to cylinder size. I know too close to the hole can cause detonation. Pistons are .060 in the hole...

Are these pistons used for industrial engines?

Wondering if these are any good http://www.ebay.com/itm/141068169280?redirect=mobile

Just tore down a 413 I've been sitting on for awhile. Found a couple of cracked compression rings, the worst cylinder is worn about .020. Might have to go .030 on the rebore. I was wondering what the going cost is these days...

Started hearing a rattle coming from the back of my 2005 Sebring. Turned out it was the upper strut mount. They are made of magnesium and just completely disintegrate into nothing! Found the replacements at Advance Auto for $27 and come with new rubber. They are made of aluminum and are...

I know this isn't the right year vehicle to discuss but I cannot get a straight answer anywhere. 2003 Dodge Ram, 2500, Hemi, overdrive automatic trans. My truck might sit for a couple of weeks at a time. I'll start it up and while idling, trans fluid will travel up the dip stick tube and spill...

http://cgi.ebay.com/ebaymotors/Dodge-Dart-Max-Wedge-1962-Dodge-Dart-_W0QQcmdZViewItemQQhashZitem2c54cb36faQQitemZ190401165050QQptZUSQ5fCarsQ5fTrucks