Search results for query: *

Hi Guys, I ordered an adjustable set of upper A arms from Peter Bergman that I understood would fit my 73. He just informed me his will not fit. I had looked at several units from various sellers and most say for 68-72 b bodies only. As you can see in the pic the stock 73 A arm to frame bar...

Guys, just got my first b body big block on the road a few weeks ago and it drives/handles awful . I went with a stock rebuilt gear box and original to the car, Federal ps unit. Even with the best alignment possible , driveability was crap. This is a 73 with big tires but my 72 small block with...

Guys, just got my long time project 73 running and on the road. I reworked the front suspension with new OEM parts. Now in search of the nearest alignment shop that can work with our 50 year old cars. I am running 235-60-15s on the front with a slightly lower than stock ride height and am...

Hi Guys, in reading the service manual, it says you can change out the input and output shaft seals with out disassembly. I thought I read in previous post someone said NAPA sold the individual seals.....anyone have any numbers...or any numbers....thanks....

Guys, I stripped pretty much all the disc brake assembly, from the spindles out, from a 75 C body before it went to the crusher. Question is will most/any of it bolt up to a 71 b body, we not going to stay with the drums up front....thanks...

Guys, noticed the fluid was low on my 72 so topped it off. Next morning big leak all over the floor. You can see fluid just leaking out the top shaft seal and dripping. Wipe it off and in a minute or so , leaking again. ALL with the engine off. Can one replace that seal easy with out doing a...

Guys, here is the master I removed from my newly aquired 68 manual brake, all drum car. My 1972 Motors Manual says, remove two brake lines, four holding bolts, disconnect rod at brake pedal, remove and replace. As you can see the replacement does not have the rod attached nor does any...

Guys, my part guy has ordered me two different kits and no fit....anybody know the number I need...thanks.

Guys, trying to get a 73 clunker going again. I have had the car over ten years and have never driven it. Motor was locked up when I got it. So, K member is pulled and I am going thru everything before putting in a rebuilt 440. I got the steering box pulled and ordered a rebuild kit from...

Guys, several power booster rebuilders have responded they cannot rebuild my stock 73 unit at this time, I assume its the corona thing, so I have been looking at the 8 inch aftermarket units for my stock brake system car. Discs front, drums rear. Flea bay lists many...any builder/namebrand...

Guys, do I have a Dukes of Hazard car already set up for those amazing jumps...or was this car just so fast they had to slow it down...ha ha. Found about a 10 to 12 pound weight bolted with three rubber isolated bolts to the underside near the rear axle, why did they do that. Is it for...

Guys, in removing the locked up 440 in my 73 and having a 67 440 replacement engine ready to swap, I noticed the 67 motor does not have a pivot boss for the power steering brackets to bolt to. The later engine has the boss , drilled and tapped, and the older has no boss at all. Are there other...

Guys, Mopar nube here trying to drop the K member out of my 73 clunker. Gonna try to get the torsion bars out today with out beating the heck of them if possible. Appears ALL the rubber bushing , k member, strut, sway , u and l a arms, rear torsion cross member , need replacing. Is there...