Search results for query: *

Front sway bar from a 69 Charger. Will fit other years. Decent shape with all hardware. 100.00 delivered. PM me if interested. [[[[Sale Pending]]]]

4 Speed shifter. This should be from a 69 B-Body with a bench seat. I put it in storage in 1977 so I can not remember much about it. It is a nice shifter and will clean up nicely. It seems to work fine but I would re-shim the shift box. I only say that because on a old unknown shifter that is...

I have a complete non-A/C heater box. Remover from a running and driving 69 Charger. will fit 58-70 and possible older b-bodies. Very good shape. You should be able to use it as is but in all fairness I can not guarantee it. All I can say is it worked with no leaks and the blower had all speeds...

Wiper motor 2 speed, switch, link arm and wiring. Removed from a 69 Charger. Most liely fits 68-70 and possibly others. Was working when removed and I just bench tested all the components and they work fine. 75.00 delivered. Can do Paypal. PM me here if interested.

Proportioning Valve from a 69 Charger. Car had manual 4 wheel drum brakes. Was working fine. Will include the master to valve lines. 30.00 shipped. PM me here if interested.

Used for mock up only. Fits big blocks and hemi. Bought new from Mancini. Aluminum High Flow MRE86800 50.00 delivered. PM me here if interested.

Front emergency brake cable removed from a 69 Charger. In good shape with hardware. 40.00 delivered. PM me here if interested.

Front backing plates complete will include new shoes if wanted 10 x 2 1/2 removed from 69 Charger. 80.00 plus shipping. PM me here if interested.

Headlight harness removed from a running 69 Charger. Decent harness. Had connector by battery cut out and hard wired. Harness can be cleaned up and re-taped. Has vacuum lines attached. 65.00 shipped. PM me here if interested.

Removed from running 69 Charger. Automatic Transmission Neutral Safety Switch Harness 1969-70 B-Body After 11-15-68 Late 1968 All 1969-70 C-Body. 20.00 delivered. PM me here if interested.

Engine wiring harness from a 69 Charger. Fits big block 383-440. Fair condition was on a running car. I think one terminal is off for coolant sensor and bulkhead connector has damage.. Could be cleaned up and re-taped for your project. 30.00 shipped.Pm me here if interested.

68-70 B-body with Rally dash. One board is original and works. Pins were soldered and not good. Could be fixed. The second is brand new solid state but defective. The voltage regulator part does not work. I am sure it is a cheap fix and radio shack most likely has the part. 60.00 shipped for...

Power steering 90 degree fitting used on 1966-68 cars with a Hemi Aand Big Block A-Body's. 40.00 shipped. PM me here if interested.

I removed these from my 69 Charger prior to restoration. They were nice and tight and look to of been replaced. Here is what I have. Upper and lower ball joints, Pitman arm [power steering], Idler arm, Tie rod ends and adjuster sleeves, Strut rod bushings, misc hardware. 125.00 shipped. PM me...