Search results for query: *

What is the best sealant to use on the end bolts on a 906 head? And would I be ok, if I remove 1 bolt at a time without having to replace the header gasket?

Does the steering wheel have to come off in order to replace the shift indicator bulb on a 67 coronet?

So I've been looking at the comp cams 251/[email protected] 564/564 lift with 110 lsa. To replace the mp 284 484 cam. What's everyone's thoughts? Would it be a nice rowdy lope?

I've been fighting a stumble forever, at cruise at any speed I can stab the throttle and it has a huge stumble then it will pickup after about 5 seconds. Looking at the afr gauge when this happens it will spike up to 17. Is it possible the cause could be how the msd Distributor is setup? It's...

So after switching from the drum brake master cylinder to the disc/ drum master cylinder. I think the brake pedal sits a little lower, and now the brake lights stay on. I was told the bracket for the brake light switch is adjustable. Does anyone have a picture that shows the adjustment? 67 coronet.

This might be a dumb question, but I have a autometer fuel pressure gauge in a gauge cup. I'm wanting to know if I can just loosen up the gauge cup and pull the gauge out without disconnecting the fuel line from behind the gauge? I want to pull the wires out for the light.

on my 67 coronet I'm having a hard time getting the parking light bulbs out. I dont want to break the bulbs as they still work, but when I try to push the bulb in the socket to twist it out. Its like the socket is frozen. Any suggestions?

I have a 16 gallon jaz fuel cell with a fuel sender. Is it worth the trouble to getting a gauge? Is it easy to wire the gauge to the sender?

on a automatic on the column. Wondering how hard it is to replace the backup light operating lever on a 67 coronet?

Looking for engine pictures of a 440 Indy ez 295 with 2 inch headers in a 67 coronet. I'm wanting to know how hard it is to R&R spark plugs?