Search results for query: *

I’m planning to install a power steering cooler soon, and wonder if it matters that the cooler will be higher than the pump ? I’m planning a spot in front of the radiator, mounted right below the upper core support, hoses going thru the core support, under the battery tray, and to the pump and...

So, I’m thinking of a new set of wheels/tires. Has 15x8 magnum 500 all around, 235-60 front, 275-60 rear. I want to be able to swap back and forth as my “mood” and travels dictate. likely 17x8 all around, same 4.5 backspace as the 15’s. Staggered tire sizes, likely 255-50 front and 275-50...

Well, I pulled the trigger…had a 5% off code at Rockauto.com. The Description of the Lares 11033 was NEW !, and “ firm feel” !!! Before I ordered, I called the Lares customer service #, the guy was nice, helpful, confirmed it was new, not rebuilt. Said the “ firm feel” was to give it better...

My steering box is worn out in my 68 roadrunner. Leaks, and cannot be adjusted for the “play”. Couple of different shops have looked at it, I have to watch it close on the highway at 70. Need constant attention (wanders) . Been aligned by those shops, both say the same thing. All the rest of...

Since I got the car in 1998, it has had springs with 6 full leaves on each side. My car was an old drag car early in it's life. It sits too high in the rear to suit the stance I want. I have installed Andy F’s front spring hangers which did lower it some, but still 1 1/2 to 2 inches higher than...

Had the front end rebuilt about 1000 miles ago on my 68 road runner. New QA1 tubular upper control arms, bigger tie rods with QA1 solid steel adjusters, Moog LCA bushings, plates welded to the bottom of the LCA’s, and poly strut rod bushings on the OE strut rods. Aligned by an old Mopar master...

Looks like i will be replacing LCA bushings and strut rod bushings this winter on my 68. It has the OE torsion bars which I figure are .890 ? Thinking now's the time to consider some bigger bars for better cornering and take away some of the "float" the car seems to have. BTW, shacks are KYB...