• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Moms68

    I need a flexplate edumacation

    For a Mopar 440 and 727 transmission, when did the factory use 10" vs 11" flex plates? When purchasing a new torque converter for street performance use, what would be the advantage to one over another?
  2. Moms68

    Way to present an engine for sale

    I will be removing a very nice running moderately built 340 (x heads) within the next few months, and am looking for some thoughts on how to prepare it for sale. Thinking a good video showing it starting up and running with oil pressure, etc. A newspaper for proof of the date. Maybe...
  3. Moms68

    Dougs headers with 2" tubes

    I am building a 440 for my 68 Charger. It is a 9.5-10 compression motor with: .030 over Icon IC9953 pistons Eagle H beam rods Comp cam 21-224-4 hydraulic cam Hughes lifters 440 Source heads- mildly worked (cleaned up) Edelebrock Performer RPM with a 780 Quick fuel carb 727 with 2200 stall...
  4. Moms68

    RB valley pan/ plate recommendation

    For a fresh 440 .030 over with pro source aluminum heads and Edelbrock Performer RPM intake. Other than the Felpro 1215 what other options should be considered?
  5. Moms68

    vin stamp decode

    I have a late 1969 440 block and would like this stamp decoded. I can’t find what the C stands for. Is it C body?
  6. Moms68

    440 engine id?

    In the process of building a ‘69 440. Found that this engine had a standard transmission bushing in the crank. Any way of telling what model car this may have been from?
  7. Moms68

    Anyone running a Quick fuel carb on a 440?

    Considering a 750 Quick Fuel for the 440 I’ve putting together. The engine has zero deck height, 440 source heads, a mild cam and will have headers. This will be in a street car ‘68 Charger, and projected HP around 500. Looking at an performer rpm intake. I have a Quick Fuel 650 on a 340 and...
  8. Moms68

    Permatex gasket shellac

    I needed a new bottle and had a hard time finding it. No more Indian head! Can they still call it “original”?
  9. Moms68

    Adjustable rockers- rebuild or new rollers?

    Should I have a set of Crane adjustable iron ductile rockers rebuilt (around 550.00) with new shafts/ banana grooves or go with new roller rockers like Comp pro magnums? Going on a newly built 440, Eddy 60929 heads, 10:1 compression non stroker. Thanks in advance.
  10. Moms68

    Where to buy Edelbrock heads

    Where should I buy a pair of 440 Edelbrock Performer RPM heads? I know that they’re back- ordered but wondering if Summit, Jegs, etc. charge your card right away or when the parts are delivered. Can you buy direct from Edelbrock? Thanks
  11. Moms68

    440 build- piston/ rod selection

    I am building a 440 for my 68 Charger. This will eventually replace the 340. The block is a late ‘69 standard bore which will need a .030 over bore. I am working with an engine guy and we are in the planning stages for a 10:1 street machine that have around 500hp. Car has a 323 posi rear...
  12. Moms68

    Howards lifters vs Lunati

    I’ve had issues (collapsed) with the Comp hydraulic lifters in my 340 and want to replace them. Does anyone have experience with Howards or Lunati hydraulic flat lifters or another recommendation??
  13. Moms68

    Rattling noise 904 trans after rebuild

    Finally have ironed out many issues rated to a 904 rebuild in my 340 powered Charger. Fired things up and have filled the trans to the proper level. Took it for a test drive and it shifted great, with no leaks, but there a rattling tinny sound in neutral or park. It goes away in drive or...
  14. Moms68

    Floor shift torque shaft bushing

    For a ‘68 Charger with floor shift. Are 2 bushings required? My original appears to have just one.
  15. Moms68

    440 block- current prices

    I've been looking for a 440 block and crank to start an engine build. I've been in the market for only a few months, and since my area is southern New England, prices seem to be higher within my search of 100 miles of CT. I've read about members finding blocks or complete engines for a few...
  16. Moms68

    Pulling my 904 this weekend

    I'm removing the 904 tranny this weekend to have it rebuilt properly, and will also be replacing the torque converter. Any helpful hints for the removal? Admittedly it's been a while since I've done this. I'll have the front of the car on ramps and the back up on jack-stands. I have a low lift...
  17. Moms68

    Small block tranny replacement

    I’m have a transmission question. I am at a crossroads as to the drivetrain in my car. It is a ‘68 Charger with a moderately built 340, about 350hp. When the engine was installed several years ago, I had the original 904 rebuilt by a local shop. The tranny was slipping badly under a load...
Back
Top