• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Charlie Brown

    No Power Steering Assist At Idle

    Although this pertains to my 1962 300, I thought I'd put this out to you guys. The power steering works fine at speed, but at idle I have very little or close to no assist. I rebuilt a TRW pump previously because it was leaking, and it worked fine. About 1000 miles after rebuild, the no assist...
  2. Charlie Brown

    Power Steering Pump Issue

    I have the pictured PS pump in my car. I rebuilt it about 800 miles ago. It worked fine until last week. I now have very little, if any "parking lot" assist. When the car starts to move forward, the assist returns. Increased engine rpm also helps. While driving, there are no issues. Could the...
  3. Charlie Brown

    Leaf Spring Clamps

    Can someone tell me the purpose of those leaf spring clamps and If I need them. I currently don't have any on my 64 Polara. If they are necessary, where should they be located. Charlie
  4. Charlie Brown

    Firm Feel Rear Sway Bar 62-67 B Body

    I would like to know if anyone has installed a Firm Feel rear sway bar on a 62 - 67 B body (mine is a 64) WITH DR. DIFF REAR DISC BRAKES. Having issues with my install. Appreciate any photos if possible, especially where links meet axle housing mount. Charlie
  5. Charlie Brown

    Alignment Issues

    Car in question is a 64 Polara. Pretty sure there was never any structural damage. I've installed Moog K 7103 off set bushings at both control arm locations (total 4 bushings). New lower control bushings etc. I have a Blue Point (Snap on) bubble caster / camber gauge with turntables. Never used...
  6. Charlie Brown

    Need Help - Broken Alignment Cam Tab On Shock Tower

    This is what happened when doing a home alignment. I think I may be in for some major repair here. But before I tear into this repair, I was thinking that there would be solutions out there to help me along. I did install new Moog offset bushings, front and rear, in the control arms. I have a 64...
  7. Charlie Brown

    Roller Bearing Idler Arm

    Has anyone swapped out a known good OEM idler arm for a roller bearing idler arm - without making any other suspension changes. What I'm interested in knowing is this worth doing and if yes, what were your observations from this change. Car is a 64 Polara.
  8. Charlie Brown

    Master Cylinder Issues

    Fairly new (less than 2 k miles) on a manual four wheel disc conversion from Dr. Diff. Two issues. 1) - after car sits for a day or so, first application of brake pedal results in pedal going to the floor. Second application of brake pedals results in a normal pedal. Brakes then function as...
Back
Top