Search results for query: *

I have a 440 engine that was rebuilt and stored poorly. I had to take it apart,clean it and reassemble it. it has a Comp flat tappet cam,that had break in lube on it,I had to wipe the lube off it,and clean and soak the lifters. I need to relubricate the cam and lifters to break them in...

I am assembling a 440 engine that I took apart about 3 years ago and the push rods are tapered down on the last half inch on one end. I cannot remember if the tapered end goes in the lifter or the rocker arm. I replaced the cam and lifters with a Comp flat tappet hydraulic setup. Should I even...

I am doing a rear disc brake conversion on my 70 Charger. I bought the Right Stuff rear disc brake kit. I also ordered the green bearings to replace the factory tapered roller bearings . I noticed that the green bearings come with a spacer,and I am assuming that the spacer goes on the axle...