Search results for query: *

I’m looking for a day/night, chrome based rear view mirror in excellent condition. Post photos of what you have and price including shipping to 14020 This is for my 1964 Fury, if heads are exchangeable then I will just need the head. Thank you!

I am looking for a hot water control valve for a 64 Plymouth heater box to be used as a core for rebuild. Thank! Bob

Need a structurally perfect front passenger side spear for a 1964 Fury 2 door hard top. Let me know what you have including photos. Thanks!

I need a small yoke 10 spline for my 742 case @Fran Blacker please contact me about the one you have.….please post price and shipping to 14020.

Looking for a complete matching factory lock package, ignition tumbler, door locks (large locks), glove box lock and trunk lock complete with keys for a 1964 Fury. Must be in working order and all original to one car as it would have been from the factory.

I ran into an issue when I was installing my disk brake conversion, my left spindle is bent. It wasn’t a problem with the drum brakes because the shoes could move slightly due to the springs. The spindle is actually bent downward which is causing the caliper to drag on the rotor, passenger side...

I am looking for rear set of turquoise seat belts correct for a 1964 Plymouth Fury. I am also looking for a passenger front seat belt retractor correct for the year and model.

I am looking for the part on a 64 Plymouth power booster that has the acorn end that goes into the master cylinder. When I changed to a dual MC I found that the PO had at some point lost the part and replaced it with a hex head bolt. The car is in storage so I can’t post a photo of what I need...

Need these two caps for my 64 Fury Thanks

I know this is a wish but does anyone have a good (especially the threads) front emergency brake cable for my 64 Fury 2 door. The one I need is the one that goes from the foot pedal to the Y below the tail stock of the transmission. When I installed the new rear end housing in my car I found...

I am looking for a set of backing plates for a 10"x 2.5" 8 3/4” rear end. Looking for a set that will clean up nicely. Let me know what you have… Thanks!

I am in need of the left side short emergency brake cable from a 68/70 B body with 11” brakes and an 8 3/4” rear end. Cable must be usable and in good condition. Thank you very much!

Looking for a complete drum to drum, less the differential for a 65 to 70 B body with 2.5”x 10” brakes. I am located midway between Buffalo and Rochester and would like to be able to drive to pick up, up to 4 hours. Thanks FBBO

Looking for a complete 1965/1967 8 3/4” B body drum to drum rear end housing although the third member isn't needed. I am in NY between Buffalo and Rochester. Let me know what you have and we can go from there.... Thanks, Bob

Doing a rear axel conversion on my 1964 Plymouth and need a complete set of 1965 or up backing plates to install 2.5”x10” brakes. I would prefer a complete set with all hardware attached in as nice of condition as possible. Thanks Bob

Need a Speedometer cable needed for a 1964 Plymouth Fury, let me know what you have. Thanks!

I am in need of board #2426475, I found a tear in mine with missing pieces. This is from a 1964 Plymouth Fury.

My 64 Fury has given me a few surprises, nothing major but enough to take up time and a bit of $$$ to make things right. The previous owner has installed a Be Cool cross flow radiator and because it was wider then the original he moved the battery tray back closer to the exhaust manifold and...

Looking for someone who has an 8 3/4" 3.23 Clutch style Sure Grip that actually wants to sell it. Located in NY, 14020 Cash in hand, prefer small yoke for a 64 Plymouth Fury. PM me with info.. Thanks FBBO!

Need a nice thermostat housing for my 1964 Fury, NO CHROME………factory cast iron piece, minimal rust or corrosion please. Thanks!