Search results for query: *

Painted my new dash pad for my 64, pricy but it sure looks nice! I also had my steering wheel restored.

What is everyone using to lubricate their speedometer cable? Thanks!

Does anyone offer a digital dash for a 64 Fury?

Who on the site was doing the plastic vacuum chrome plating, I need some dash parts done.. Thanks!

Need to take the outer horn ring off, does it come off by turning or is it held on by screws. I don’t want to damage it so I’m asking in the hopes someone knows.

I’m looking to replace dash pad on my 64 Fury. The original pad is cracked in several places and makes the rest of the interior look bad. I wanted to hear feed back on experiences with purchasing replacement pads. I know there are cheap replacements which don’t have the steel frames as the...

From what I have read front seat belts were standard in 64 and rear belts were an option. My rear belts are black while my front belts are turquoise. My front belts have chrome retractors that seem to have the belts wrapped around them. I am missing the retractor on the passenger side and will...

What is everyone using for replacement steering wheels to get away from the large diameter and damaged wheels?

I was going to put this in electrical but figured I would ask here first. I need to pull my instrument cluster and test all of the indicator lights before I re-install it, how do I go about doing this? I have new bulbs and holders, this is on my 64 Fury. Thanks!

When I bought the car it had Edelbrock rear shocks on it. I went to pull the old rear end out from under the car this morning and the drum hit the extended shock and the next thing I knew I had oil running out of the stock. I am pretty sure there were gas filled so now I need to replace the rear...

I need the NAPA part numbers for the replacement drums and wheel studs once the original studs are drilled out to separate the drums and hubs on the front end of a 64 Fury. Thanks!

Can you change the sending unit in a 64 Fury’s fuel tank without pulling the tank, at present there is no rear end housing in the car.

I am in the process of pulling the rear hubs on my 64 Fury.. The idea was to just replace the bearings and seals but holy ****, I can't see going through this every time I need to check my brakes. So after reading several posts I figured well...I will go to Dr. Diff and buy the axle conversion...

I’m on the process of changing out my differential and want to change my bearings and axel seals, found the bearings but only place I can find the seals is eBay, crazy prices!

Can anyone decode this fender tag, very little as far as options. Thanks!

Has anyone taken the clock apart and tried to repair it, any info to share?

I have gotten to the point on my check list for my 64 Fury where after finishing the install of the 383 which included updating to a later electronic voltage regulator, alternator and mini starter, modifying the radiator mounting and installing the fan frontwards with a 1” spacer. I installed...

Does anyone have a photo of the original wire looms that mounted on the first exhaust manifold bolt? Trying to see if they mount facing up or down. Thanks!

Does anyone know the mounting location for the Sure Grip jacking warning decal? A member told me that he had seen a couple stuck on the inside of the glove box door.

Does anyone know if a group 27 battery will fit in the tray?