• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. E

    Stroker windage tray

    Has anyone ever used this windage tray? I’m assuming you don’t use gaskets? Or do you?
  2. E

    Eddy RPM heads with stock manifolds

    Can stock exhaust manifolds be used with Eddy RPM heads? Big block? Thanks
  3. E

    904 with overdrive

    Looking for help on what small block Transmission with overdrive should I use? What would be the easiest one to use it will be mounted behind a flat head six cylinder. Any help would be appreciated.
  4. E

    340 stroker dyno

    Had my 340 that I had stroked and bored to a 418 on the dyno Friday. I was a little disappointed with the numbers till he told that his dyno is 10% off. He has done other motors that have been on a other dyno and his is always 10% low. Using 10% on the dyno sheet the numbers come in what Hughes...
  5. E

    Bad Casting hole in Hemi?

    I’ve been trying to find out why my Hemi was leaking oil. After replacing gaskets I noticed a small pin hole in the block. I took a small grinder to clean it up. When I took a air nozzle to it I could feel air in side the block I JB welded it no more leaks. This is a 1965 block Anyone else...
  6. E

    426 hemi block

    Whats the going price on a new 426 Hemi Cummins block? I have one I may sell to help fund a car purchase
  7. E

    Small block bellhousing

    is there option for a small block other than factory or a steel scatter shield ?
  8. E

    340 stroker

    Has any one here done a large 340 stroker? Looking to do a 414 or 426 motor, Thanks
  9. E

    1965 nascar intake

    I was wondering if anyone can help with identifying the work done on this intake. Its a 1965 NASCAR intake that was cut apart modified and welded back together. The top was machined down at some point and the adapter was added for a smaller bolt pattern. Would it be a early Arien Vanke? or by...
Back
Top