Search results for query: *

I'm looking for a 1970 6-way bucket seat tracks. Thanks!

I'm looking for a passenger front side marker (or just the frame) for a 70 Road Runner. Thanks!

I'm looking for a headlight buzzer diode for a 70 Road Runner rally dash (if that matters). I believe it looks like a "T" electrical plug and two short pieces of wire that dead into each other. Thanks for the Help! p.s. my wiring looks good and the buzzer works when I leave the key in, but not...

I'm looking for a 68-70 B-body (maybe other years fit too?) convertible top frame front header....the front "bow" where the top latches bolt on. Does anbody have one? THANKS!

OK, I screwed up and bent the area where my cigarette lighter "socket" attaches. This is on a '70 Roadrunner with a rally dash. I can probably straighten it, but if anyone has a straight "driver quality" piece I'd be interested. I didn't take too close of a look (kinda pissed at myself last...

I'm looking for one 15" & one 16" wiper blade arm with the "blade backer pivoting piece" too for a '70 Roadrunner. The arms need to have good splines on them. Have any extras? Thank You!

On 68-70 b-body convertibles, the belt molding trim along the rear 1/4 windows is held in place by 3 tiny (1/2") #8 screws (per side). Those screws go into some "U-clips" or "J-clip" type speed-nut things that are about 1" long. Those clips slide onto a sheet metal edge & create the holes that...

I somehow lost my driver's side rod (thin metal about 2" long) that connects the inside door handle to the lock mechanism so you can open the door from the inside. Does anyone have a driver quality one? Know where to buy one? THANK YOU! fyi - 70 Roadrunner

I'm looking for a passenger side "split" tail light bezel for a 70 Roadrunner/GTX. Thanks!

I'm looking for some patch pieces for my 70 b-body convertible. The body shop said they can fabricate some pieces, but I think patches would be easier. I have rot in the back seam of the lip where the convertible trim screws on. 68-70 b-body would work. Also, if you have a 70 convertible...

I'm looking for a cruise control lever for a 1970 b-body. Thanks for the help!

I'm looking for a '70 B-body cruise control lever. I believe it should have 2 wires. Thanks for the help!

I've got a "decent" passenger fender on my Roadrunner, but the area around where the parking light screws in is rough (bondo). Does anyone have a scrap 70 Plymouth b-body fender that would cut a patch for me? I might consider a whole fender if it's not too crazy in price. I know there's a...

I'm looking for a big block 6qt. oil pan + 3/8" pickup tube long enough (& fits) the pan. This is basically the "hemi/six-pack" size pan, with the smaller diameter 3/8" 440 pickup tube. It can be a stock or aftermarket set. This is for a 70-body with a skid plate on the engine cross-member...

I'm trying to find an inexpensive aluminum 440 six pack intake. I don't need a "dated A-12" and am just looking for something cheaper than new/aftermarket. Do you have an old aftermarket Edelbrock laying around? Thank you.

I'm looking for a 440 block with caps & some 452 (or maybe 975) heads with the valve gear. I'm now in St.Louis, MO and can drive a reasonable distance to meet you. What do you have?

I'm looking for a forged 440 crank drilled for a 4 speed (pilot hole in back). I think a 413/426 crank would work too since I plan to balance the motor. I'm now in the St.Louis area and could drive to meet you as far as maybe 250 miles. What do you have?

I'm looking for a cruise control switch/lever (turn signal lever) for a '70 Plymouth Road Runner. I think all b-bodies 68-70 are OK, but I'm not positive. I do have a broken one for reference. Thanks!

I'm looking for a decent 69/70 B-body driver's door. All I really need is the door shell, but complete/partial door is OK too. I'm in Chicago.