• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. PurpleBeeper

    Aluminum 6pack Intake Narrower?

    I've always heard aluminum and iron 440 six pack intakes are the same except for the metal. You can buy paper gaskets for the intakes (69 I think) that "sandwich" the valley pan. I've never been able to fit the paper gaskets on my iron intake which makes me wonder.....are the aluminum ones...
  2. PurpleBeeper

    #180 Six Pack Throttle Plates?

    Looking at my outboard carbs, I see that the two sets of throttle plates don't match. The rear carb has thicker aluminum #220 throttle plates in it (one's from '69 that are supposed to stick sometimes) and the front carb has #180 thin, steel throttle plates with some type of washer/shim on the...
  3. PurpleBeeper

    Correct Six Pack Gaskets? Can You Identify These Pictures?

    Can you help me identify these gaskets in my Holley 37-396 kits? I need some help just to be SURE I don't screw this up. Thanks Everyone!
  4. PurpleBeeper

    6020 Metering Block

    I've seen a lot of Holley metering blocks that have the carburetor list number stamped on the metering body to. My metering block is stamped "6020". Is that the correct metering block for a 4375 '70 4spd center carb? If not, what carb is it for? Thanks!
  5. PurpleBeeper

    6020 Metering Block

    I've seen a lot of Holley metering blocks that have the carburetor list number stamped on the metering body to. My metering block is stamped "6020". Is that the correct metering block for a 4375 '70 4spd center carb? If not, what carb is it for? Thanks!
  6. PurpleBeeper

    Which Six Pack Gaskets Are Right?

    I've got 4375 center & 4382/4383 outboard carbs. The Holley 37-396 kits have several body/base gaskets. Which ones are correct? A picture of all the correct gaskets would be very useful so I don't screw this up. I've had a bunch of carb issues and I don't want to make a mistake. Thanks...
  7. PurpleBeeper

    Idle Feed Restriction Size?

    What is the stock idle feed restriction size for 4382 & 4383 '70 outboard carburetors? I'm rebuilding the carbs right now & putting in Quick Fuel metering plates. The paperwork says the screw in idle feed restrictions that the plates come with are .039", but that I can change them. I'd like...
  8. PurpleBeeper

    Need Original Six Pack Setup Info Please

    I'm trying to un-modify my six-pack carbs and put them back stock. They're 70 4spd carbs 4382/4375/4383. 1. What is the stock accelerator pump cam? white? 2. What position did the accelerator pump cam screw come in? Anyone have a pic? 3. What is the original squirter? 31? 4. Original outboard...
  9. PurpleBeeper

    Make My Own Metering Plate?

    I've got a '70 4spd six pack setup with front carb #4382. It's been running "pig rich" and the carbs have been modified, so I'm trying to put them back to stock and work from there. This particular carb (#4382) calls for a 34R-6153-34 metering plate. I can't seem to find this metering plate...
  10. PurpleBeeper

    Power Valve Passage on Six Pack Base

    Does anyone know for sure which hole on top of a six pack center carb (#4375) is the one you drill out to install a Holley #125-500 "Power Valve Check Ball Kit"? I'm going to rebuild my carbs in the next week or two and I thought I might go ahead and do this upgrade while I'm at it. Thanks!
  11. PurpleBeeper

    Where to Buy 6-pack Metering Block?

    Where do I find a Holley metering block for a '70 4spd center carb? What about a '71 auto center carb? Are they the same? May be a dumb question, but are these metering blocks the same as a 4bbl? If not, what are the differences if anyone knows. On Chicago Carburetor's site, I see the...
  12. PurpleBeeper

    '70 Manual vs. '71 Auto Center Carbs?

    I've been trying to work through a rich idle situation with my 440+6 and I'm thinking about swapping out the center carb. My car is a '70 4-speed car and I have '70 4-speed 440 carburetors on it. I have another set of '71 automatic 440 carbs. What is the difference between a '70 4spd center...
  13. PurpleBeeper

    Six Pack Idle Mixture Screws Don't Do Much???

    440-6 w/10.5 comp. & moderate cam & about 10-11" vacuum. My six pack has been running pig-rich (can smell the fuel out of the exhaust) & I have been "de-tuning" the carburetors back closer to stock. The only non-stock carb parts I have now are a 3.5 power valve, the power valve holes in the...
  14. PurpleBeeper

    440 Six Pack Nitrous Install

    Hey Everyone, Since I put the six pack back on my Road Runner I went ahead and put the nitrous system b1ack on. It's THE LAST six pack Cheater system built by Nitrous Oxide Systems. Enjoy!
  15. PurpleBeeper

    Six Pack POURING Gas in the Motor-What's Up?

    My six pack setup is really dumping fuel in the motor and giving the rings a good washing. At idle I get a ton of smoke out of the tail pipes and after about 20 min. at idle I had an extra quart (of gas) in my oil pan. What's wrong? I just rebuilt the carbs.... -drilled metering block...
Back
Top