Search results for query: *

I'm in need of about 4" of stainless tubing, 5/16" ID, to make a spacer for my hood scoop. I haven't found any shops locally selling it ? Maybe someone heading to Carlisle could bring it along ? 2" would do, Thanks !!!

I need a few pairs of the push-in buttons, that hold the package trays in place, on '63-'65 B-bodies. I haven't seen them listed anywhere, but I may be using the wrong term for them ? Let me know if anyone has them available, Thanks...

I need a NOS, or VGC Gold Pentastar, for my '63 Dodge, lower right fender. Should have stud & locating prong for mounting. Hoping mine turns up, but...

I'm looking for the Shield under the filler nozzle, on the '63 Dodge 330, 440, Polara, assuming they are all the same. Mine was sent out for re-plating, and never made it back, as of today. Need a quality piece, to re-finish, or longshot is NOS. Thanks for any leads on this...

My wife is retiring at the end if the year, and looking for a Sebring Hardtop Convertable, for her "winter car" in FL. Ideally looking for a low mileage, NON rustbelt car, and well maintained. Also would like to hear any input on these, as I don't know of anyone previously owning one. Thanks...

Looking for a set of Year correct seat belts, for my '63 Dodge. My originals are labelled YANKEE 60, on the buckles, and belts are 1-7/8" wide. These need to be in Very Good condition, no rust or pitting on metal, no tears in the belts. I will need to dye them Aqua/Teal, so preferably a lighter...

I'm looking for a speedometer cable, for my '63 Dodge 330. The original has been misplaced, and need another, OE part#2290-461. It seems the cables available from Imperial Services have listings for 1962-3, and 1964-5. Does anyone know if the ends of these cables differ, as I am using a '65...

Looking for a 48" length Push Button Shifter Cable, for my '63 Dodge MW project. Turns out, the 42" /6 cable will not easily clear the MW Ex manifolds. The 48" cable was the length used on All BB applications, 361,383,426, so Hoping someone has one collecting dust, on a shelf ? Let me know...

I'm looking for a set of Interior Door Panels, to fit my '63 Dodge 330, 2dr Sedan. I believe Savoy Panels will work also, not sure about other Year Models. Any color, or condition, of even a set of the top inner rails, to build from. Any leads appreciated, Thanks...

I have to reach out for a set of Interior Door Panels, for my '63 Dodge 330 2dr Sedan. I sent mine to SMS for Complete Restoration, back in November, 2016. At this point, I'm not too sure They even have them any longer, as communications with them has gone No Where. My car is at a point where...

I'm looking for 2 New BF Goodrich 775-15 Blackwall Bias ply, Coker part# is 60150. They only have 1 in stock, so I'm looking for a pair of New. If anyone is near a shop that handles these, or knows of a pair, let me know. Estimated in-stock from Coker is mid-June. Thanks, Dan N.

Looking for a Nice Driver or NOS R/T Emblem for a '69 Coronet, as picted below. Part # is 2901817. Let me know what you might have, Thanks...

Long Shot Here, Looking for an original vinyl seat insert, from a '65 Coronet, 2dr Sedan. My drivers seat is gone. I've gotten the NOS material from SMS. I think I can save the passenger, and rear seat inserts. Ideally, I'm looking for the driver seat, in Turquoise, but I'll probably need to...

I'm looking for replacement pieces for my '63 Dodge 330. Mine were pretty decent, so I sent them to Advanced Chrome plating in Tennessee. BIG MISTAKE. They really butchered them, and won't back their work up, so I'm looking for replacements. I need the Hood Star, Pt#2276188, Trunk Star...

I'd like to find the corner sections, both sides, for my '65 Sedan. I'm thinking 10-12" each way from the corner, will be more than enough, but will consider any. Even better, if the lower extensions are there also. Need to have rust free, or as close as possible. Thanks

I'm replacing the tank on my '63 330 Sedan. My old tank is in decent shape, using the O-ring seal. The new tank is using the grommet style seal, so I'd like to find another neck for my project. I would like to find one in nice shape, No Rust, as I'll need to get it looking like new. I think all...

Looking for a set of 4- 15" steel wheels for my '63 Dodge. These accept the 10" Dog Dish caps. I have a set of Police wheels, 15" x 7" I would possibly trade for. Would really like to find 2- 5", & 2- 8", or any combo, and possibly meet at Carlisle for the deal. Thanks...

I'm restoring my '63 Dodge 330, 2-dr Sedan, and need a RH vent window. I'd like to find a Very Clean, unscratched or chipped, date coded original, to match the rest of the glass. Let me know what you may have. Shipping to 14086, Lancaster, NY, or I can meet you at Carlisle in July, Free beer for...

I am looking for a pair of Front Door Armrests & Pads for my '65 Dodge Coronet Sedan. I have a 2dr, but the 4dr models may be the same ? I would really like to find a set in the Turquoise color option, but will consider all. Let me know if you have a set that you are willing to part with. Show &...

I'm looking for a 1-BBL Carter carb for a '65 Dodge Coronet, /6, 225. I went to start the car over the weekend, and the carb is spewing gas all over the manifold. I believe the casing is cracked, as it was repaired with silicone when I bought it. Just need a good, solid core that I can re-build...