Search results for query: *

Going to a Dominator on my 470" low-deck. Less than 500 miles on the Sniper. Have all new spare parts, from the TPS to 02 Sensor. Will include a Walbro GSL392 pump [like new] and 10-micron summit racing billet inline fuel filter. Purchased a can-bus adapter where you can plug in your laptop...

*** CORRECTION **** *Holley EFI Dual - Sync Distributor* - my fault, Holley owns MSD, it's the same product. Part #565-109 Literally brand-new in box; $200 shipped OBO. These are anywhere between $350 - $475 new.

Original MSRP from Summit Racing - MSD Pro-Billet #8545 ($322.95) MSD 6AL-2 ($302.95) MSD Blaster-2 Coil ($51.39) AR Engineering Coil Bracket ($15) allows vertical mounting to intake manifold. --- $692.29 --- Everything is nearly brand new, purchased last year for my new 470 low-deck...

Lunati Solid Lifter Cam and Lifter Kit. Nitrided. 235*/243* @ .050 .526/.546 (int/exh) lift w/ 1.5rr 115 LSA. 3-bolt. Ran for initial break-in. Discovered an issue with the RB engine (non-oiling related) that had the turbo setup, and went to a N/A 'B' engine. This had no effect on the...

This was just used for mock-up purposes. Never ran, like new. My application required an oval air-cleaner setup to fit between the six-pack hood opening. $90 shipped. PayPal.

Lunati Nitrided Custom Solid Lifter Camshaft + lifters (.526/.546 236/243 115LSA) (ATDC 6.5 - BBDC 56.5 - BTDC 2.5 - ABDC 52.5 - Advance 0): $260 - 15 minutes runtime, literally just broke-in before tearing engine down due to cracked piston, no street miles. Great 'sleeper' camshaft in an N/A...

Engine is getting replaced by a 470-500ci (400 low-deck) stroker or 493 RB, unfortunately, time to let this go to purchase the stroker kit. I have 300+ post thread on theturboforums, working this combination out. I've ran boost on 10:1 (static) cast hypereutectic pistons with pump 93 since...

Snow Performance Stage II Kit + 220 PSI pump + 2.5 Gallon Reservoir. Original kit price was in the $450-$500 range, the pump was an extra $100 and the tank another $120 if I remember correctly. Selling for the same price as a basic stage I kit, will work with N/A and F/I applications. Never got...

http://www.jegs.com/i/Powertrax/754/1240-LR/10002/-1 Already installed into carrier, new bearings with less than 400 miles. Replaced R&P and installed a limited slip unit from Dr. Diff. Probably less than 1500 street miles on the locker since new. Only used royal purple gear fluid. Perfect...

727 TSI 10" Converter + B&M SFI Flexplate *****SOLD TO BONE***** MSD Part #50982 SBM/BBM Starter Beast of a starter @ 3HP, unfortunately you'll have to grind a small amount off of the mounting plate surface to mate it to a 440 because it won't clock all the way to screw in the bottom mounting...

Snow Performance Stage 2/MAF-MAP + MSD 6AL/BTM/2-step + Free... I have a Snow Performance Stage 2 kit that's never been used. It has the upgraded high pressure pump, as well as a 2.5 gallon reservoir. This is a $500 kit alone, along with a $120 tank (it will come with the factory capacity one...

Gauging interest for my newly acquired setup. I recently purchased a Dr. Diff Viper conversion, which cost $538 shipped with drilled and slotted rotors (from Rotor Pros). My 01' Viper calipers and pads with 10,000 miles cost me $370 off Ebay. I got in touch with Dr. Diff and he told me my...

http://www.jegs.com/i/Comp-Cams/249/SK21-228-4/10002/-1 Very low miles on cam (200-300 miles), less than 2,000 miles on timing chain. Cam and lifters look like new, with minimal wear. Timing chain is in great condition. Lifters are matched, and marked for installation. Went to a 3-bolt...

Anyone have a set, looking to get away from stock rocker arms. Thanks.

Carolina Machine Engines rebuilt 213 (HD Police) Cylinder heads for BB Mopar. All new valvetrain (does not come with rocker arm assembly), set to run up to a .510 lift Camshaft. New Valves, Valve Springs, Retainers, 3-Angle performance valve job, etc. Less than 500 Highway miles. They are just...

Performer RPM Intake Manifold. Used and painted Hemi Orange. $90+Shipping.

Mopar Performance .509 Camshaft and matching lifter set. .509 lift/292* duration/108LSA (single pattern) Used with less than 500 Highway miles, driven to and from daytona beach for a week. Minimal to no wear. $90+Shipping.

213 (motorhome/hd police) cylinder heads, 3 angle valve job, new valves, new valve springs-set up for the .509 camshaft. These heads are completely refurbished with only 500 miles from Carolina Machine Engines. I went to Edelbrock Performer RPM aluminum heads. These heads only differ from the...

Some parts I just taken off the car.. 213 (motorhome/hd police) cylinder heads, 3 angle valve job, new valves, new valve springs-set up for the .509 camshaft. These heads are completely refurbished with only 500 miles from Carolina Machine Engines. I went to Edelbrock Performer RPM aluminum...

Weiand SS Cross Ram FS*updated price. Wasn't looking on parting with it, but I changed my mind on the setup. Was sold through Direct Connection in late 1969 and throughout the early 1970s. Un-modified, other than gasket matched ports. Still retains the original rubber intake manifold gasket...