Search results for query: *

Hi Doug! Mike

Just saw this: GL-8U : Universal Gel Lube This product appears to fill a lot of uses! Mike

Anyone? Mike

Can anyone share tube removal tricks? It's in the 3.8 V-6 I'm rebuilding and in good condition. I lathed out a driver but, it won't budge, just flares out the bottom end. Thanks fellas. Mike

Hi fellas, Has anyone here tried a Hubb oil filter? They are a tad pricey but, new engines are too. Mike HUBB Filters – The Sustainable Reusable Oil Filter

Hi fellas, I just purchased a new rear clutch piston return spring and it resulted in .080" of slop in the assembly. In lieu of a new A&A thicker piston can anyone see anything wrong with machining a ring style spacer to position the piston up in the retainer to eliminate the excess slop? It...

Hi fellas, I'm changing my oil and got to thinking if I'm running the proper amount of oil. I have a Milodon 30930 pan (7 quart) and I also have a 3 quart Moroso accumulator. I have been using 10 quarts but, should I figure 6 quarts in the pan to perhaps cut windage loss as I have the 3 quart...

Has anyone here built a run-in stand using a bell off a TF and a empty converter? Mike

Not a Torqueflite (C-6) but funny! I rebuilt many of these over the years but, none made me laugh like this! Mike

I just read about the new cross bolt main caps from Milodon. Talk about a slick design. I don't have a link but, it shouldn't be too difficult to find. Mike

SuperStock Engine Now Available as Standalone Hellcrate Option (dodgeforum.com) Mike

Good article here: https://moparconnectionmagazine.com/hughes-engines-tech-center-lifter-bore-lineup/ Mike

Hi fellas, I'm thinking about selling some 8 3/4 pigs. Most rebuilt but I have a used 3.23 Sure Grip 7260 yoke. Would 250 be a fair price? I drove the car it came in so I know it's good. Mike PS: After a closer look I realized it is used but, I went thru it, repairing/replacing as was necessary...

Hi fellas, The previous post got me thinking about the factory tool for burnishing. Does anyone have one? Or can anyone tell me the diameter of the ball section? It looks like a lathe project for me! Mike

Hi fellas, The vent itself is leaking gear oil right out the cap and of course all over the housing, shock, and fuel tank. I have had it out twice and Teflon taped the threads (seems OK), and cut small plugs out of porous foam to insert in the bolt bore-with no luck. Lube level is below the...

I need a oil filter adapter plate gasket for my 65 318 (poly) and all I can find (70078 Fel-Pro) is a o-ring. I'm sure it takes a flat gasket in the recess in the block side. Can anyone help me? Thanks! Mike

Hi fellas, I am rebuilding a (unknown core) 1968 727 B for a customer and it had a modified valve body installed. I would like to contact the builder to obtain trans specs. The ID inscribed: CRS 17156-810732 Does anyone here know what I have???????????? Mike

Hi fellas, I've welded half couplings and pipe plugged several housings with good results but on my NEW 65 Coronet I was thinking about drilling and tapping for a 1/8" plug. I do not want to weld on a greasy housing and bake a bunch of crud on the inside. Has anyone here tried the drill and tap...

Hi fellas, I am a diehard 8 3/4" fan, so I went to the fabricated Moser axle housing. It is a real nice piece but, I also ordered it with a back brace (why not spend an extra $150). My mistake was forgetting I had moved the springs inboard. The U bolts didn't clear the brace and the shocks sure...

Hi fellas, I just wanted to share my experience with this procedure. I machined an adapter to bolt on the crank flange to mount my dial indicator on and checked the pump opening concentricity with the empty case I'm using for this build. Initial reading checked at 12, 3, 6, 9 O'clock had .020"...