Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I do not recall anyone posting photos of the HEI conversion so, I just finished one today:
I use Ford truck coils for the spark generator, Rock Auto has Standard brand for under $10.00. I buy the connector pigtails also.
Mike
I had an incorrect diagram attached here and I changed it out...
I was provided a set of MSD plug wires when I picked up my 540 from Muscle Motors back in 2016. They appear to be top quality but, I am having great difficulty getting them to snap onto the plug connection. I have them lubed right up with dielectric grease but, due to location and mainly my arm/...
I'm looking for recommendations on spark plug wire support hardware. These need to fit my Indy 440-1 heads with TTI 2 1/8" primary tubes Anyone have a favorite style/brand? Photos would be appreciated/optional. Thanks!
Mike
I'm wiring up my 65 Belvedere and have 17 circuits to run to the front of the car. I'm going thru the right fender well and need a way to route thru a grommet in the fender at the front edge. I thought a distribution strip might work as I can terminate each wire and attach them to the strip. It...
As the title says, I'm well into the rewiring of my 65 Belvedere. I am using the Infinity Box system. I also am adding some extra wiring outside of the parameters of the Infinity system. I have a FAST 2.0 EFI system, MSD ignition, oil accumulator solenoid, 50 watt stereo amp, electric fuel pump...
Can anyone direct me to a source for wiring loom end closures? I want to tidy up the appearance of my wiring and raw loom ends do not look finished. I am using both the corrugated split and woven styles. When I can, I use heat shrink tubing, but I can't always get it over connector ends.
Mike
Hi fellas,
I found this article in Farm Show Vol. 42, No. 5 and wanted to share. Dale Colvert at Overnight Solutions LLC, P.O. Box3004, Merton, Wis., 53056 has developed the Transdenser II, a condenser sized, relay type device that fastens to the ignition coil. It reduces current across breaker...
Hi fellas,
Yesterday I was sorting through the wiring harness for my 65 when I found that the wiper switch has a terminal to feed power to the back up lamps. Why do you suppose the engineer decided that was logical idea?
Mike