Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey Guys Got a 383 In The Superbee With an Aluminum Radiator and Running A Stock Shroud. Its a Stock Engine.
What Fan Setup Would You Recommend?
17 or 18 Inch?
Should I Run a Fan Clutch?
Thank You
I Recently Saw a Episode Of Garage Squad And They Said a 1992 Dodge Dakota Starter Would Work On a Big Block?
Has Anyone Used One With Any Luck?
Thanks
Is There a Difference Between The Oil Pressure Sending Units That Go On The Rear Of The Block For The
Gauges vs Lights on The 383 Engines?
If So Where Can I Find One For a Standard Dash With a Light
Thank You
Hey Guys Got a Couple Questions..
Its Been a While Since I’ve Torn Down an Engine For a Rebuild..
Removing Everything From My 383 So I Can Send It Out To My Engine Builder For a Rebuild. He Doesn’t Have The Time To Tear It Apart At The Moment..
Making Sure I Label Everything..
Connecting Rods...
just wondering how you guys went about sealing yours so they dont leak. Bought the black gaskets and thinking about gasket sealing both sides.
How often did you tighten them After? Thanks
I Had My Engine Rebuilt 2 Years Ago And Am Planning To Start It For The First Time In The Next Few Weeks. I Sprayed a Few Squirts Of Diesel Down The Cylinder A Few Days Ago and need To Add Antifreeze.. Any Other Precautions I Should Take? Thanks
I had a flywheel on my engine when i sent it out to get rebuilt last year.. Turns out it was an 130 tooth flywheel on the engine and i need a 143 tooth flywheel for my 440 engine. Do i have to get the engine balanced to the flywheel or can i get one from brewers and just bolt it on? Thanks
I got my transmission bolted up to the engine and its ready to bolt it but i read last night that a 10.5 inch clutch assembly wont work with an 11 inch housing? Im not sure what size bellhousing i have . Is there any way to tell what size and style bellhousing i have without ripping everything...
I ordered shorty headers for my 440 and the starters hitting the damn headers. Its a mini starter from a 95 ram. I bought a powermaster before the engine was finished a years ago and tried it, its even worse!! Any suggestions. I spent an arm and leg on the headers. Thanks you
Im going to be installing a new clutch setup tmrw and the a833 transmission tmrw in my charger. The engine is out of thecar and on a engine dolly so i can install both units as one.
Any tips on installing everything, do i need to take any measurements, do i lube the clutch splines, if i fill...
Looking to purchase a new radiator soon. Looking for 1 inch or bigger tubes and an electric fan setup. Most likely aluminum.. Are you happy with your purchase? Im not sure of the distance from the stock water Pump pulley to the core support of a 440 engine in a 68 charger with a 440 engine...
Just wondering if anyone has pics or could help. Putting the 44o in my car and just wondering which bracket goes on which side. One has the sleeve where the long bolt slides in. The other doesnt. Thanks