68 Road Runner restoration

Painted the quarters today. I think it looks pretty good

Got some paint on some stuff today

So I have been doing bodywork for a while now and got the engine bac from the machine shop. It turned out to be a 436 stroker with a .040 bore.here’s a few pics for your viewing pleasure

Been working on the body work hope to paint it in the spring. The short block is done stroked it to a 434

So after a few months,I have finally got to work on the Road Runner. Here’s a few pictures. Started to do bodywork on the passenger door and hopefully finished up the rear quarters where I welded the skins on. Applied the Eastwood opti flow roll on epoxy primer. I recommend it if you have no way to spray primer on. Thanks for looking.

Here’s some pictures of the progress on the road runner. Things will probably slow down for a while as I recently lost my job. But I will continue with the restoration as best as possible. Got some more yellow paint on and replaced the 22in. Radiator support with one for a 26 in radiator. Also primed the engine compartment and drivers side quarter panel with Eastwood,s roll on epoxy primer. It works pretty good. It’s a lot thinner than I expected . Thanks for looking . Have a great 4 th of July