• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1963 Dodge Polara Max Wedge Tribute

rutgersknight

New Member
Local time
8:34 PM
Joined
Nov 23, 2012
Messages
3
Reaction score
16
Location
North Carolina
Feedback: 0 / 0 / 0
Contact seller
Original LA plant build, all original body panels - only trunk pan was replaced. Original 383, 330hp car - has original Fender Tag and IBM card
Full Ground up build, car was media blasted and completely gone through
Have tons of pictures and receipts
Engine is a custom build - Speed o Motive (out of California)
Blueprint and Balanced 499 RB stroker - best parts used
Indy 440-1C cast iron Max Wedge raised port heads, Comp hydraulic cam XE294H, A&A Intake, 12.5 Compression, Edlebrock carbs
Max Wedge Exhaust with cutouts
Recent Trans upgrade: Custom built Pushbutton 727 by A & A ($ 6,700.00)
10 inch converter and 3.91 Auburn Sure Grip
All steering and suspension components replaced, Front Disc Brake conversion, all new fuel system components
Seats were custom stitched by Times Machines in Florida - retaining original pattern
New Carpet, headliner, door panels, restored dash and steering wheel, New front and rear glass, body is perfectly straight.
Car is garage kept - engine is periodically run and short trips through the neighborhood only
Probably 100 miles since resto was done
Price $ 49,500.00

IMG_1354.jpg


1963 Polara.jpg


IMG_1356.jpg


1963 Polara - 2.jpg


1963 Polara - 3.jpg


1963 Polara-5.jpg


1963-1.jpg


P4280037.JPG


IMG_3368.jpg
 
Last edited:
Reduced price to $ 45,000.00
Original LA plant build, all original body panels - only trunk pan was replaced. Original 383, 330hp car - has original Fender Tag and IBM card
Full Ground up build, car was media blasted and completely gone through
Have tons of pictures and receipts
Engine is a custom build - Speed o Motive (out of California)
Blueprint and Balanced 499 RB stroker - best parts used
Indy 440-1C cast iron Max Wedge raised port heads, Comp hydraulic cam XE294H, A&A Intake, 12.5 Compression, Edlebrock carbs
Max Wedge Exhaust with cutouts
Recent Trans upgrade: Custom built Pushbutton 727 by A & A ($ 6,700.00)
10 inch converter and 3.91 Auburn Sure Grip
All steering and suspension components replaced, Front Disc Brake conversion, all new fuel system components
Seats were custom stitched by Times Machines in Florida - retaining original pattern
New Carpet, headliner, door panels, restored dash and steering wheel, New front and rear glass, body is perfectly straight.
Car is garage kept - engine is periodically run and short trips through the neighborhood only
Probably 100 miles since resto was done

Dodge Polara 042.JPG


Dodge Polara 043.JPG


Dodge Polara 045.JPG


Dodge Polara 046.JPG


Dodge Polara 035.JPG
 
Last edited:
Auto Transport Service
Back
Top